Render that looks “a bit tired” in October can turn into a proper problem by March. Winter is when small faults get worse. Rain gets into a crack, freezes, expands, and pushes the crack wider. Do that a few dozen times over a cold, wet Midlands winter and a hairline crack can become a loose patch.
The good news is that most warning signs are easy to spot yourself. Pick a dry afternoon, walk round the house slowly, and look for the following.
1. Cracks, and what kind
Not every crack is a crisis.
- Fine, hairline crazing across the surface is common on older sand and cement render. It’s often cosmetic.
- Single cracks you could slide a coin into, cracks that run in a line from window corners, or cracks that have water staining beneath them deserve a closer look. Water is getting in, or soon will be.
- Stepped or diagonal cracks that carry on into brickwork could point to movement in the building. That’s not a render problem, and it’s worth getting looked at properly before anyone covers it up.
2. Hollow or “blown” patches
Gently tap the render with your knuckle or the handle of a screwdriver. Sound render gives a solid, dull note. A hollow, papery sound means the render has come away from the wall behind it.
Blown patches often look fine until they suddenly bulge, crack or fall off, usually after a freeze. If you find a hollow area, mark it with a bit of chalk so a renderer can see how far it goes.
3. Bulges and loose edges
Look along the wall from the corner, so the light rakes across it. Bulges, lifting edges and render coming away at the bottom are all signs that water is already behind it.
4. Damp patches, staining and green growth
- Dark patches that stay wet long after rain has stopped.
- Streaks running down from window sills, gutters or downpipe joints.
- Green or black growth, usually on north-facing walls or under trees.
Often the render isn’t the root cause here. A leaking gutter, a blocked downpipe or a sill with no drip edge can soak the same patch of wall every time it rains. Fix those first, or the new render will end up stained too.
5. Problems at the bottom of the wall
Render should stop above the damp-proof course, usually with a bead that throws water clear at the bottom. If yours runs right down to the ground, or soil, paving or a raised flower bed is banked up against it, moisture can wick up into the wall. You may see flaking, salt marks or damp inside at skirting level.
6. Rusty beads and failed sealant
On older render, metal corner and edge beads can rust, leaving orange streaks and pushing the render off. Also check the sealant (mastic) around windows and doors. If it’s cracked, shrunk or missing, water has an easy way in at exactly the point where render is weakest.
7. Flaking paint
If your render is painted sand and cement, flaking paint isn’t just cosmetic. Bare patches soak up water. A wall that has been painted many times can also end up with layers that trap moisture.
What you can do yourself before winter
- Clear gutters and check downpipes are connected and not leaking.
- Pull back soil, bark or gravel that’s piled against the base of the wall.
- Keep an eye on any crack. A pencil mark at each end, with the date, will tell you if it’s growing.
- Take photos now, so you have something to compare against in spring.
Why timing matters
Most renders, including silicone, K-Rend monocouche and traditional sand and cement, shouldn’t go on in frost or near-freezing weather, or in heavy rain. Manufacturers set temperature limits on their products, so a careful renderer will check the forecast and may need to wait for a suitable spell. Small repairs done in autumn are usually simpler than large repairs done in spring after a winter of water getting in. In mid-winter you may be stuck waiting for the weather.
If you’re not sure whether what you’ve found is cosmetic or something more serious, get someone to look at it in person. A good renderer should tell you honestly if it only needs a patch, or even nothing at all, rather than a whole new wall. Our rendering Birmingham page explains how we survey and repair render. For local jobs, see rendering in Shirley.
Want someone to take a look?
RCR Connections Ltd is a Birmingham based plastering and rendering company covering the whole of the Midlands. If you would like us to look at your walls, WhatsApp me on 07453 614095, message the page, or use our contact page. You can also see our plastering and rendering services and finished work on our projects page.
