Alvechurch sits in the valley of the River Arrow in Bromsgrove District, north Worcestershire, with the Lickey Hills to the north-west, Redditch to the south and the Worcester and Birmingham Canal looping around its western side. It is an old place. Its name means Ælfgyth’s church, and the centre still follows the street plan of a small medieval market town laid out by the Bishops of Worcester. RCR Connections Ltd is Birmingham based, covering the whole of the Midlands, and Alvechurch is one of the villages we come back to again and again, for anything from a single ceiling in a Bear Hill cottage to boarding and skimming a whole extension on one of the estates off Station Road.
This page is written the way we think about a job in the village. It starts with the story of the place, because the age and history of a building decide how it should be plastered. Then it walks through the main kinds of house you find in and around Alvechurch, the problems we see in each, and the methods and materials we would use. Near the end there is practical detail on planning, preparing your home and what happens on the day.
Free, no-obligation quote in Alvechurch: WhatsApp me on 07453 614095 with a few photos, or send us a message.
A bishop’s village
Offa, Bredon and the see of Worcester
The Victoria County History of Worcestershire, published in 1913, thinks Alvechurch was probably part of a 20-hide estate around Westhill, Cofton Hackett and Rednal that King Offa of Mercia granted in 780 to the monastery at Bredon. No separate charter for Alvechurch has been found, so that link is an argument rather than a certainty, and other accounts simply say Offa gave it to the Bishops of Worcester. What is clearer is that King Athelstan gave “Ælfgythe Cyrcan” to the church of Worcester in 930. In the Domesday survey of 1086 Alvechurch belonged to the see, along with four outlying berewicks at Cofton Hackett, Westhill, Tonge and Overton.
The bishops kept it for centuries. The county history says the manor stayed with successive bishops until 1648, when Parliament’s trustees sold it, and that the bishop got it back at the Restoration. It remained with the see until 1860, when the Ecclesiastical Commissioners took it over.
Market, fair and burgage plots
In 1239 Walter, Bishop of Worcester, obtained a grant from Henry III for a Wednesday market and a three-day fair at the feast of St Lawrence in August. When the grant was renewed for Bishop Godfrey Giffard in 1270, market day moved to Saturday. Around the market a small borough grew up. By 1299, the county history records, there were about seventy-four burgage tenements, each paying its rent to the bishop. The town was run by a bailiff chosen each year at the court leet, its people sat as their own jury separate from the manor’s, and it was still styled a borough in 1808, although the market had disappeared by the end of the eighteenth century. The council’s leaflet adds that the Black Death, which came back several times in the fourteenth century, held back the growth of the little town.
You can still read that medieval planning on the ground. Bromsgrove District Council’s description of the Alvechurch Conservation Area calls the village a planned medieval market settlement that has kept much of its form. The long, narrow plots running back from the street frontages, the tight little Square, and the way Bear Hill and Red Lion Street meet all come from that period. Modern housing was mostly kept out of sight of this core, which is a large part of why the centre still feels so small and complete.
The palace by the moat
The bishops had a palace on the high ground east of the village, and several of them lived there for long spells. William of Blois died there in 1236, Godfrey Giffard dated many of his letters there, and Reginald Brian was staying there in December 1356 when a letter from the Black Prince arrived describing the battle of Poitiers. Brian died at Alvechurch of the plague in 1361. When John Leland passed through in the reign of Henry VIII he noted that the palace was built entirely of timber and had recently been repaired by Bishop Latimer.
After the Civil War the palace was neglected and eventually pulled down. Sources do not agree on exactly when it went, so we will not put a date on it here. What survives is the moat system and the remains of fishponds, now a scheduled monument at the Moat House, and one of the few places in the district where you can still see how a medieval great house sat in its landscape.
Brick, nails, needles and cars
Alvechurch was never a big industrial place, but it was not purely agricultural either. Nail and needle making were carried on in the parish, as they were in Redditch and Studley. The county history mentions brickworks on the banks of the canal west of the village, and other accounts place a brick factory in the hamlet of Withybed from the nineteenth century to the middle of the twentieth, and that local brick turns up in plenty of Victorian cottages around the parish. Between 1949 and 1956 the village was also home to Dellow, a small maker of lightweight sports cars used in trials.
Canal, railway and the twentieth century
The Worcester and Birmingham Canal was cut through the western side of the parish at the end of the eighteenth century, fed by the Upper and Lower Bittell reservoirs. Today the stretch through Bromsgrove District has its own conservation area, with an appraisal adopted by the council in 2021. The railway station opened in 1859 on the line from Barnt Green towards Redditch, and that line is now part of the Cross-City route.
Once the railway arrived, and especially after the Second World War, the village grew outwards. Estates of the 1960s and 70s filled the land between the old core and the station and spread up the slopes, and later developments followed, including the housing built on the site of the old first and middle school after the new schools opened north-east of the village in 2008. The A441 now bypasses the centre, which has helped the old streets keep their character.
The Square, Bear Hill and Red Lion Street
If you walk into the centre from the station, the change in building styles is very clear. The newer houses give way to brick cottages and then to the older timber-framed buildings that stand on either side of Bear Hill as it rises into The Square. Red Lion Street and Bear Hill together are the heart of the conservation area. Two crosses stand in the centre, the Windsor Memorial Cross and an older medieval cross, and both are marked on the council’s conservation area map. Most of the buildings here are homes, shops or pubs, and many are old enough to need traditional plastering methods inside.
What the buildings are made of
Why timber framing lasted so long here
The council’s conservation area description makes a point that matters a great deal to anyone plastering in the village. The ground under Alvechurch is clay and marl, which swells in wet weather and shrinks in drought. Timber framing copes with that movement far better than rigid masonry, and oak was plentiful, so builders here kept putting up timber-framed houses long after brick had become fashionable elsewhere.
The oldest houses in the village, numbers 24, 26 and 28 Bear Hill, are thought to date from around the fifteenth century, although parts were rebuilt in the nineteenth and twentieth. The Old House on Bear Hill, from the early seventeenth century, survives in a much more original state. The county history also describes a fine sixteenth-century half-timbered house between the church and the main part of the village, by then divided into two.
Georgian and Victorian brick
Alongside the timber frames are Georgian and Victorian brick houses, many of them built on the old burgage plots, and some older frames were refronted in brick when owners wanted to look up to date. In 1913 the county history noted a block of red brick cottages standing on the little triangle of land at the crossroads in the centre. Further out you find Victorian terraces and villas in local brick, often with solid nine-inch walls and lime plaster inside.
St Laurence and the Butterfield rebuild
The parish church of St Laurence stands on high ground just west of the crossroads. Most of it was rebuilt in the mid-Victorian years by William Butterfield, one of the great church architects of the period. Published dates for the rebuild vary slightly between sources, and the county history describes the north aisle as older work that he kept. The church is a reminder that much of what looks medieval in the village was rebuilt, patched and refaced by the Victorians, and that is just as true of the cottages as of the church.
Post-war brick and block
The later estates are built in the usual way for their time: cavity brick or brick and block, with wet plaster on the blockwork, plasterboard ceilings, and, in many houses from the 1970s, textured coatings on the ceilings. The newest homes are almost entirely plasterboard inside, fixed with adhesive dabs to the blockwork or screwed to timber or metal studs.
Plastering the old village centre
Start with a proper look
On a timber-framed or early brick house, the first visit matters more than anything else. We work out how the wall was built, what finish is on it today, whether it is damp, and whether anything has been done in the past that is now causing harm. A lot of the trouble we find in old Alvechurch houses was caused by well-meant repairs in the 1970s and 80s: cement render on the outside, gypsum plaster inside, plastic paint on top, all of which trap moisture in walls that were designed to breathe.
Lime on lath and on solid walls
Where the original finish was lime, we normally repair with lime. On a timber frame that can mean renewing a section of riven or sawn lath and laying on a haired lime base coat, then a finer lime finish. On solid brick or stone, the lime goes on in several layers, and we wait for one to stiffen before laying on the next. Lime takes longer than gypsum, both to apply and to dry, and it needs to be kept damp and protected while it cures. In return it moves with the building, lets moisture out, and it lasts.
Ceilings in old houses
Old lath and plaster ceilings often look worse than they are. A ceiling with cracks but a sound key can usually be consolidated and repaired. If the plaster has come loose from the laths, or the laths themselves have failed, we can either take it down and replace it, or fix new boards over it where that is acceptable. In a listed building the choice needs the council’s agreement, and we always talk that through before work starts.
Uneven walls are part of the character
People sometimes ask us to make the walls of a 400-year-old cottage dead flat and square. We can get them very straight, but it is not always the right thing to do. On timber frames especially, a gently undulating finish that follows the frame looks right, and forcing a flat line can mean packing out with a lot of material that adds weight and traps moisture. We will show you the options and let you decide.
When gypsum is fine
Not every room in an old house needs lime. A kitchen extension built in the 1990s, a modern partition, or a bathroom already lined with plasterboard can be skimmed with ordinary gypsum finish. The skill is in knowing where the old fabric ends and the new begins, and in making sure the two are separated properly so one does not damage the other.
Plastering the Victorian and Edwardian houses
Solid walls and blown plaster
Many Victorian houses around Alvechurch have solid walls, and the plaster on them was originally lime. Over the years much of it has been patched with gypsum, sometimes in several different layers. When we see hollow, blown or crumbling areas, we tap the walls to find out how far the damage goes, and then decide whether a patch will hold or the wall needs stripping back.
Damp in the lower part of the walls
A tidemark along the base of a wall in an older house is common, but it is not always rising damp. On the clay soils around the village we often find raised ground levels outside, blocked air bricks, failed gutters or a cement render bridging the damp course. Fixing the cause comes first. Then the plaster can be renewed in a material that suits the wall, which is not always the waterproof sand and cement that some damp companies specify.
Picture rails, cornices and other details
Victorian and Edwardian rooms in the village often keep their original cornices, ceiling roses and picture rails. We can run new plain cornice in situ, repair damaged runs, and plaster up to existing mouldings without burying them. If a section is missing, it can often be copied from what survives in the same room.
Plastering the post-war estates
Textured ceilings
A lot of the 1960s and 70s houses in Alvechurch still have textured ceilings. If they are sound, we can skim straight over them after preparation. If they are cracked, sagging or badly patched, over-boarding and skimming gives a new, flat surface without the mess of taking the old ceiling down. Older textured finishes, especially those from before the turn of the century, may include asbestos, and a laboratory test on a small piece is sensible before the ceiling is sanded, scraped or drilled. We have written up the whole process in a guide to plastering over Artex ceilings.
Walls that have been papered for decades
Strip wallpaper from a 1970s room and you often find plaster that is sound but rough, scored and patched. A skim coat over the whole wall, after the loose areas are cut out and filled, gives a clean surface for paint. Where the plaster underneath is weak or dusty, a bonding coat or a coat of suitable primer goes on first so the new finish grips.
Cracks above doors and windows
Fine cracks climbing diagonally from the top corners of door and window openings are normal in houses on shrinkable clay. Most are the result of seasonal movement, not structural trouble. We rake them out, bridge them with scrim tape and skim over them. If a crack is wide, growing or stepped through the brickwork, it is worth asking a surveyor or structural engineer for an opinion before it is covered up.
Extensions and kitchen-diners
Knocking a kitchen and dining room together and adding a single-storey rear extension is one of the most common projects on the estates. When the builder has finished, we board and skim the new ceilings, plaster the new block walls, and patch around the steel and new openings so the joins with the old house disappear. Doing it this way means the whole room is finished to one standard.
Loft rooms and garage conversions
Many of the semis and detached houses around the village have had lofts converted or garages turned into rooms. These need insulated plasterboard or boards fixed to the studwork, careful taping and skimming at the angles, and attention to the slopes and dormers where cracks are most likely to appear later. Building control usually inspects the insulation before the boards go on, so the order of work matters.
Newer houses and snagging
Dot-and-dab boards
On the newest developments the walls are mostly plasterboard stuck to the blockwork with adhesive dabs, then either taped and jointed or given a thin skim. Common complaints are cracks along the board joints, screw or nail heads showing through, and hollow patches where a board has lost contact with its dabs. We can fix individual problems or skim whole rooms if the finish was never good.
Holes after trades
New sockets, a moved radiator, a new alarm system or a bathroom refit all leave holes and chases. We fill and finish these so that, once painted, they cannot be seen. A small repair done well is much better than a filler patch that shows through the emulsion.
Room by room
Kitchens
Kitchens are where most of our Alvechurch jobs start, because a new kitchen exposes every wall in the room. Once the old units come off, we usually find tiles to remove, holes from old pipes and cables, and walls that were never flat enough for modern fitted cabinets. We prefer to plaster after the first fix of electrics and plumbing and before the units go in, so the new kitchen sits against a true, finished surface rather than one patched around the cupboards later.
Bathrooms and shower rooms
Wet rooms and showers need backgrounds that will stand up to moisture. Behind tiles we normally fit moisture-resistant or cement-based boards rather than skimming, because a gypsum skim is not designed to sit behind a tiled shower. Elsewhere in the room, a skim over sound plaster is fine, as long as the room has a working extractor fan and the paint is suitable for bathrooms.
Hallways, landings and stairwells
The tall wall over the stairs is the one most people put off, because it is hard to reach. We set up proper steps and boards or a small tower so the whole wall can be worked in one go, which matters because a skim needs to be laid on and finished while it is still workable. In older houses we also check for loose plaster around the stair string and the landing balustrade, where years of knocks have often weakened it.
Bedrooms and living rooms
These are usually the simplest rooms to plaster, but in older houses they are often where the most original fabric survives. A front bedroom in a Victorian house on the edge of the village may still have its original lime ceiling and cornice, so we check before suggesting boarding over. In newer homes, living rooms often have cracked ceilings where the boards were never taped properly, and a skim over the whole ceiling is usually the neatest answer.
Exposed beams and timber
Many older homes in the village have exposed beams in ceilings or walls. Plastering up to old timber takes patience. The edge needs to be cut neatly, the timber protected, and the plaster finished slightly back from the beam so the two can move independently. We never plaster tight against oak in a way that would trap moisture in the timber.
Choosing the right repair
Patch, skim or re-plaster
There are three main levels of plastering work. A patch repair fixes a small area, such as a hole left by a plumber. A skim puts a thin new finish coat over existing plaster that is sound but marked, uneven or cracked. A full re-plaster strips the wall back to brick or block and starts again with a base coat and a finish. We will always tell you which one the wall needs, and we will not recommend stripping back if a skim will do the job properly.
Over-boarding
Over-boarding is the practice of screwing fresh boards straight over the old surface and giving them a skim. It is quick, it avoids most of the dust of taking a ceiling down, and it adds a little sound and heat insulation. It is not right for every situation. On a historic ceiling it can hide a problem rather than solve it, and the extra weight needs to be fixed into sound joists. We check what is behind before we fix anything.
Lime or gypsum
On walls built with lime mortar and originally plastered with lime, lime is almost always the right choice, because it lets moisture move through the wall. On modern brick and block walls, gypsum is quicker to apply and gives a very smooth finish. In houses that have been extended several times, you can find both in one room, and part of our job is getting the junctions right.
Outside the house
Rendering in and around the village
Some cottages and many later houses in Alvechurch are rendered or painted. For older buildings we use lime renders, which allow walls to breathe. For modern masonry we apply sand and cement, silicone render, or K-Rend monocouche, a through-coloured render that needs no painting. For more on how the systems differ, read about K-Rend monocouche rendering or our article on how K-Rend monocouche compares with silicone or sand and cement.
Taking cement off old walls
One job we are asked about regularly is removing hard cement render from old brick or timber-framed houses where it is trapping moisture. It needs care: the brick face can come away with the render. We test a small area first, then decide whether full removal and a lime render is realistic, or whether a more limited repair is the better option.
Before winter
Cracks, hollow patches and blown render let rain in, and a hard frost can turn a small fault into a large one. Before the colder months, run through our list of warning signs that render needs repair and walk round the house with it. For bigger rendering jobs in the area, see rendering in Bromsgrove and rendering in Redditch.
Planning, listed buildings and the canal
The conservation area
The Alvechurch Conservation Area was designated in November 1968, one of the first two in Bromsgrove District. It covers the historic centre, including the church, the Square, Bear Hill and Red Lion Street, and the site of the bishop’s palace. In a conservation area there are extra planning controls on things like the type of cladding allowed, extensions, dormers and demolition. If you want to change the outside finish of a house in the area, check with Bromsgrove District Council first.
Trees and grants
The conservation area rules also cover trees. Under the Town and Country Planning Act, you must give the council six weeks’ written notice before cutting or felling most trees in the area, which can matter if a tree has to come down to put up scaffolding or reach a gable. The council has also offered grants for the repair of buildings of historic importance, subject to funding, so it is worth asking whether any help is available before major work to an old house in the centre.
Listed buildings
A number of buildings in the village are listed, including the church and several of the timber-framed houses. For a listed building, work inside can need listed building consent as well as work outside, particularly if historic plaster, lath or panelling is being removed. We are happy to work with your architect or the council’s conservation officer and to use traditional materials where they are needed.
The canal conservation area
The Worcester and Birmingham Canal conservation area runs past the village and has its own appraisal and management plan. If your property backs onto the canal or sits close to it, it is worth checking whether it falls within the boundary before planning any work to the outside.
When you don’t need permission
For ordinary houses outside the conservation area, plastering inside and repairing existing render in matching materials do not usually need planning permission. Re-rendering a house in a different finish may count as permitted development if the result is similar in appearance to other houses nearby, but rules vary, and some estates have had permitted development rights removed. If in doubt, ask the council.
The hamlets around Alvechurch
Hopwood
Hopwood lies north of the village on the old Birmingham to Evesham road, near junction 2 of the M42 and the canal. In 1913 the county history noted wharves on the canal south of Hopwood, with the canal entering the Westhill tunnel to the north-east. Today it has a mix of older cottages, farm buildings and more recent houses, and the jobs we do there are mostly re-skimming, ceiling repairs and work on extensions.
Rowney Green
Rowney Green is a hamlet on higher ground to the south of the village, with scattered houses among fields and small woods. The county history recorded several gravel pits there. Many homes are detached and set in large gardens, and we often work on extensions and conversions of outbuildings.
Bordesley and Lea End
Bordesley, between Alvechurch and Redditch, shares its name with the Cistercian abbey of Bordesley near Redditch, which was granted land in the parish in the twelfth century. Bordesley Hall and its park were among the chief houses of the parish in 1913. Lea End and Forhill lie to the north, and the old Roman road of Icknield Street runs through Forhill, with farmhouses, cottages and newer homes along the lanes.
Weatheroak Hill and the canal side
Part of Weatheroak Hill falls within the parish, and at Moorgreen Hall nearby the county history noted the remains of a moat. Along the canal you find lock cottages, former wharf buildings and boatyards, as well as the marina. Buildings near water often have damp problems, and solid-walled canal cottages in particular are best plastered with breathable materials.
How we plan a job in Alvechurch
- WhatsApp us on 07453 614095 with pictures of the rooms and roughly how big they are, or fill in the form on the contact page.
- If the house is old, one of us normally comes out to inspect the plaster in person before recommending anything.
- We agree the materials, the order of work and the dates with you.
- When we arrive, dust sheets and protection go down over flooring, the staircase, doors and anything left in the room, and we keep one clean route through the house.
- We remove what needs removing, repair the background, and apply the new plaster.
- We tidy up and explain how to dry the room out and when to start decorating.
Before we arrive
- Empty the room if possible, or push the larger furniture together in the centre where we can sheet it.
- Remove anything hanging on the walls or windows, such as mirrors, artwork, blinds and curtain poles.
- Ask your electrician to ease the faceplates of sockets and switches off the wall so the plaster can run behind them.
- Let us know about parking, particularly in the narrow streets around the Square.
- Dogs and cats are best shut out of the rooms we are working in.
Living at home during the work
There is rarely any need to move out while the plastering is done. We work one room or area at a time where we can, keep doors closed and sheeted, and tidy away before we leave each evening leaving the other rooms free to live in. Plastering is a wet trade, so expect some damp air and a smell of fresh plaster for a few days. If you are having a whole floor done, or the kitchen is out of action, it helps to plan ahead for meals and for somewhere quiet to work. If anyone in the house has breathing problems, tell us first, and we can talk through dust control and timing.
Drying and decorating
New gypsum plaster should be allowed to dry fully before it is painted, and lime takes longer still. Keep the room warm and well ventilated, and resist the urge to speed things up with a heater blowing straight at the wall. For the first coat use a thinned mist coat, or a breathable paint on lime. There is a fuller explanation in our piece on drying times before painting new plaster.
Areas we cover near Alvechurch
We work throughout Alvechurch, Hopwood, Rowney Green, Bordesley, Lea End, Forhill and Weatheroak Hill. Nearby, see plastering in Barnt Green, plastering in Wythall, plastering in Studley, rendering in Droitwich Spa and plastering in Worcester. For everywhere else, see all the areas we cover and all our plastering and rendering services.
Talk to RCR Connections Ltd
The team has 62 years of combined experience. Timber-framed cottage on Bear Hill or 1970s semi near the station, it makes no difference: the fastest way to get things moving is to send some pictures on WhatsApp to 07453 614095. You can also send us a message through the contact page.
Alvechurch homes we plaster
Alvechurch is an old village by the canal with cottages in the middle, post-war estates and hamlets around it. Here’s where we work most, the homes you’ll find there and the plastering jobs that come up.
- Alvechurch village. Old cottages and houses. Lime plaster and lath ceilings.
- Hopwood. Village homes. Kitchen extensions and ceilings.
- Rowney Green. Cottages and newer houses. Lime repairs.
- Bordesley. Village homes. Rooms replastered after a rewire.
- Withybed Green. Canal-side cottages. Damp-damaged plaster and ceilings.
- Lea End. Older homes. Loft rooms and extensions.
- Barnt Green. Early 20th century houses. Coving and full room replasters.
Whatever the house, RCR Connections Ltd puts 62 years of combined experience into it. We’re Birmingham based, covering the whole of the Midlands, and we work Monday to Friday 7am to 5pm and Saturday 7am to 1pm. WhatsApp me on 07453 614095 or message the page with photos of the room and your road or postcode in Alvechurch.
Outside, we also fit K-Rend monocouche and silicone render for homes around Alvechurch, see rendering in Redditch. Just up the road, we’re also the plasterer in Barnt Green.
Nearby, we also cover plastering in Redditch.
What our customers say
Was amazed by the punctuality from them as far as tradesmen go and the experience was stress-free with a great finish to my maisonette.
James Tranter
We chose them for our home extension, and the transformation was amazing. Their work is top-notch, and I’d recommend them to anyone seeking both quality and luxury in construction.
Emma S
These guys were great lads, grafted hard, and was really happy with the price and the end result. Blimey, it was outstanding!
Michael T
Very impressed with the workmanship and attention to detail. The project was completed on time and exceeded my expectations!
Sophia Reynolds, Property Manager
Our services
More services: Plastering repairs · Plastering and coving · Plastering extensions and lofts.
Plastering in Alvechurch: common questions
Do you cover Alvechurch and the surrounding area?
Yes. RCR Connections Ltd is Birmingham based, covering the whole of the Midlands, and works across Alvechurch and north Worcestershire. We also cover Worcester, Bromsgrove and Barnt Green. For the full list, see areas we cover.
How do I get a plastering quote in Alvechurch?
WhatsApp photos of the walls or ceilings to 07453 614095, with rough room sizes and what you would like done. We will come back with a free, no-obligation quote, or arrange a visit if the job needs a closer look.
Which parts of Alvechurch and the area around it do you cover?
All of Alvechurch and the villages and areas around it. That includes Hopwood, Rowney Green, Bordesley, Withybed Green, Lea End and Barnt Green.
Can you replaster a room after a rewire?
Yes. A rewire leaves chases and patches all over the walls. We fill the chases, and if the old plaster has come away we take it back and replaster the whole wall or room, ready for decorating.
Do you plaster older and listed houses in Alvechurch?
Yes. Many of the older houses in and around Alvechurch still have lime plaster and lath and plaster ceilings. We check what’s there first, then repair, replaster or over-board, using a breathable lime plaster where the wall needs it. If the house is listed, check with the council’s conservation officer before work starts.
How soon can I decorate after plastering?
A skim usually needs a few days to dry, and thicker backing coats need longer, depending on ventilation and the time of year. Wait until the plaster is an even pale colour all over, then start with a mist coat (watered-down emulsion).
Can you plaster over Artex?
Yes. We can skim over Artex, or over-board and skim ceilings that are cracked or uneven. If the Artex went up before 2000, have it tested for asbestos before anyone scrapes or sands it.
What hours do you work?
Monday to Friday 7am to 5pm and Saturday 7am to 1pm.
