Copt Heath is a small, leafy residential area on the south-eastern edge of Solihull, where the A4141 Warwick Road meets junction 5 of the M42 and the fairways of Copt Heath Golf Club run behind the houses. It is mostly large detached homes on generous plots, built over the last hundred years or so, with a few older cottages and some newer apartment buildings in between. RCR Connections Ltd is Birmingham based, covering the whole of the Midlands, and Copt Heath homes make up a steady part of our plastering work in Solihull.
This guide covers where Copt Heath came from, the kinds of houses you find along each part of it, the projects owners here most often take on, and how we handle the plastering on each of them, from a single ceiling to every room in a large family home.
Free, no-obligation quote in Copt Heath: WhatsApp me on 07453 614095 with a few photos, or send us a message.
Part one: from heath to golf course
A name from the thirteenth century
Copt Heath is believed to take its name from a man recorded as Roger de la Coppe in 1247. Like Bentley Heath and Elmdon Heath, it was originally a stretch of open common on the edge of cleared farmland in the Forest of Arden, used for grazing and as a route between settlements rather than as a place to live.
Part of the manor of Longdon
For most of its history the heath belonged to the manor of Longdon, an ancient settlement on the east side of what became Solihull. Longdon is recorded in Domesday as Langedone, meaning long hill. Its manor house, Longdon Hall, stood at the southern edge of the manor on Copt Heath, and the manor boundary on this side was formed by Purnell’s Brook, which also became the parish boundary. Longdon Hall was rebuilt in the seventeenth century, and its name survives in Longdon Croft and in the footpath that runs past it.
Byron and Lovelace
The manor had a surprising succession of owners. In 1815 it came to the poet Lord Byron through his marriage to Anne Isabella Milbanke, and after her death in 1860 it passed to her grandson, the Earl of Lovelace. Two Solihull roads, Lady Byron Lane and Lovelace Avenue, are named after the family.
Alfred Lovekin and the golf club
At the end of the nineteenth century Longdon Hall and what remained of its manorial rights were bought by a Birmingham solicitor, then soon sold to Alfred Lovekin, a silversmith. Copt Heath Golf Club says it was founded in 1908 by Lovekin on his own estate. It started as a small, local nine-hole course and was later extended to eighteen holes under the supervision of Harry Vardon. The club’s own history also credits the course to Vardon working with Harry Colt. The course, with its tree-lined parkland, is what gives much of Copt Heath its green, spacious feel today.
Warwick Road and the motorway
Warwick Road has been the main route south from Solihull for centuries. Houses grew up along it in the early and middle twentieth century as wealthier Birmingham and Solihull families moved out to larger plots. Aerial photographs from 1946 show the golf course already laid out, with houses along the road and in the first side roads such as Copt Heath Croft and Wychwood Avenue. The later arrival of the M42, with its roundabout at junction 5, turned Copt Heath into one of the most convenient places in the borough for anyone commuting by car.
Part two: the house file
Copt Heath does not have one typical house. Here are the main types we see and what they usually need.
File 1: early and inter-war houses on Warwick Road
The oldest houses along the main road are substantial detached homes from the early twentieth century and between the wars. Many have traditional details: tile-hung gables, leaded windows, timber porches and big chimney stacks. Inside, they usually have solid brick or early cavity walls finished in sand and lime or early gypsum plaster, with lath and plaster or early board ceilings.
Typical jobs:
- Replacing or overboarding ceilings that have cracked along the joists or started to sag.
- Re-plastering walls that have been patched many times through rewires and heating changes.
- Filling the gaps left where fireplaces, chimney breasts and built-in cupboards have been taken out.
- Matching the finish in rooms where original coving or picture rails are being kept.
File 2: post-war family houses
The 1950s and early 1960s brought more houses to the side roads off Warwick Road. These have cavity walls, sand and cement or gypsum backing coats and plasterboard or skimmed ceilings. They tend to be solid and straightforward, and most of our work in them is part of a wider update: a new kitchen, a knock-through or a bathroom refit.
File 3: modern houses of the 1960s and 70s
Roads such as Jacobean Lane have houses in the open-plan modern style of the 1960s and 70s, with wide windows, low-pitched roofs and sometimes flat-roofed sections. The ceilings are often plasterboard with a textured coating, and many have long spans that show every crack. Flat-roofed sections can be prone to condensation and leaks, which stain and soften the board beneath.
Typical jobs:
- Overboarding or skimming textured ceilings once they have been tested.
- Replacing water-damaged plasterboard under old flat roofs, after the roof itself has been put right.
- Skimming walls where large panels of old wallpaper or hessian have been removed.
- Boarding and skimming new partitions as owners rework the layout.
File 4: closes of the 1970s and 80s
South of Longdon Hall, roads such as Copt Heath Drive were built on former farmland in the 1970s and 80s. These houses are mostly brick and block cavity construction, often dry-lined with plasterboard on dabs. Common problems are nail pops, cracked board joints, hollow-sounding walls where the dabs were sparse, and damage from years of fixings.
File 5: new apartments and replacement houses
Some older houses on large plots in Copt Heath have been demolished and replaced, either with apartment buildings such as those on Longdon Croft, or with a larger new house. New-build interiors are mostly plasterboard on metal or timber frames, or dot-and-dab on block, with a skim. Our work there is usually snagging, alterations, and adding features such as feature walls or recessed shelving.
File 6: extended and remodelled homes
Many Copt Heath houses have already been extended once or twice. Each phase may have its own construction and its own plaster, and junctions between them are where cracks appear. Before we quote, we work out where the old house ends and each extension begins, because that changes how we prepare and reinforce the walls.
Part three: the projects people take on
Knock-throughs and steel beams
Opening up a kitchen, dining room and family room into one space is the most common big project we see. Once the builder has installed the steel beams and padstones, we box the steels in plasterboard (or fire-rated board where building control needs it), form clean, square arrises with beads, and plaster the new opening so it reads as one continuous wall and ceiling. Long ceilings in knocked-through rooms show every imperfection under modern downlights, so we take extra care to keep them flat.
Kitchen extensions and orangeries
Single-storey rear extensions are a feature of many Copt Heath homes. We board ceilings, including around roof lanterns and large skylights, plaster the new block walls, and form neat reveals around bifold or sliding doors. Orangeries and garden rooms with large glazed areas need a well-sealed ceiling build-up and good ventilation, so that warm, moist air does not condense on cold surfaces and mark the new plaster.
Lofts and room-in-roof
Larger houses here often have generous roof spaces that make good bedrooms or studies. On these, we board sloping ceilings and dormer cheeks to the insulation specification set by building control, form the junctions between slopes and flat ceilings, and skim to a sharp, straight finish.
Converting the garage
Using an integral or attached garage as a playroom, gym or home office is common. The walls are often single-skin, so they need insulation and lining before plastering. We work with the builder’s chosen system, whether that is insulated plasterboard, a stud frame with insulation between, or another approach.
Home offices and garden buildings
Many owners in Copt Heath now work from home part of the week. Some convert a bedroom; others build a garden office. Inside garden buildings, we can board and skim walls and ceilings so the space feels finished rather than like a shed, as long as the structure and insulation are designed for it.
Media rooms and acoustic upgrades
Media rooms and quieter bedrooms are another regular request. Acoustic plasterboard, resilient bars and double-layer boarding can all reduce noise between rooms. We fit and skim these to the system your designer or builder has chosen, taking care with joints and edges, which is where sound leaks through.
Part four: problems we are often asked about
Ceiling cracks along the joists
Straight cracks across a ceiling, often at regular spacing, usually follow plasterboard joints or the lines of old laths. They are rarely structural. A crack that is getting wider, or one that comes with a sloping floor or a sticking door, is different and needs a surveyor or structural engineer to look at it before anything is covered up.
Diagonal cracks above doors and windows
Diagonal cracks from the corners of openings can come from old settlement, thermal movement or, on clay-rich ground, seasonal shrinkage and swelling. Tree roots close to the house can play a part in dry summers. Many such cracks are old and stable. We rake them out, reinforce them with mesh or scrim and fill them before skimming. If a crack keeps reopening, the cause needs looking at before re-plastering.
Textured ceilings
Textured finishes were fashionable through the 1960s, 70s and 80s, and many Copt Heath houses still have them. Finishes from before 2000 may hide asbestos, so a lab test comes before any scraping, sanding or drilling. If the result is positive, overboarding and skimming is usually the simplest way to leave them sealed in place.
Condensation and mould
Large, well-sealed houses with big glazed extensions can suffer from condensation, especially in bathrooms, utility rooms and bedrooms that are kept cool. Mould on ceilings and corners is a sign that moisture is not escaping. New plaster will not solve that by itself; extraction fans, trickle vents and sensible heating do. We can replace damaged board and plaster once the ventilation is sorted.
Stains under bathrooms
Brown patches or tide marks on a ceiling below a bathroom or en-suite usually mean a slow leak from a waste, a shower tray seal or a supply pipe. Board left soaking for months goes soft and starts to sag. Once the plumber has fixed the leak and the ceiling void has dried, we cut out the damaged section, fit new board, and skim it into the surrounding ceiling, or overboard the whole ceiling if the rest is poor.
Cracks near new steels
After a knock-through, fine cracks sometimes appear along the line of a new beam within the first year as the structure settles and the timber around it dries. Boxing steels with board on proper fixings, taping joints with scrim and allowing the house to settle before final decoration all help. If a crack keeps growing, ask your builder or engineer to check the bearing.
Hollow walls on dabs
In dry-lined houses from the 1970s and 80s, tapping a wall sometimes produces a hollow drum-like sound. That is usually the gap behind plasterboard fixed on dabs of adhesive and is not a fault in itself. It becomes one when boards flex, cracks appear or fixings pull out. We can re-fix loose boards, add fixings and skim, or strip and re-board if it is widespread.
Part five: how we work in larger homes
Planning the sequence
On a big building job, plastering is one stage among many. We like to agree with you or your builder where we fit: after first fix electrics and plumbing, after any steelwork and structural alterations, and before second fix joinery and decoration. Getting that right avoids electricians cutting into fresh plaster or decorators waiting for walls that are not dry.
Protecting the house
Copt Heath homes are often lived in during the work, and they often have expensive floors, kitchens and joinery. We lay heavy-duty floor protection on routes in and out, cover stairs, seal doors to rooms that are not being worked on, and keep mixing outside or in a dedicated area. Waste is bagged and taken away as we go.
Lighting and finish quality
Modern interiors with long walls, big windows and lots of downlights expose every ripple in a wall. We check the finish with a light held close to the surface, raking across it, as the plaster sets. That shows up anything that would catch the light later and gives us the chance to put it right while the plaster is still workable.
Drying times
Plaster in a large, warm house usually dries faster than in a cold terrace, but thick backing coats and plaster in rooms with poor airflow can still take a while. Do not force-dry with heaters or dehumidifiers close to the walls. Wait for an even pale colour, then apply a mist coat of thinned matt emulsion before any other paint.
Part six: working with the council and neighbours
Planning and building control
Copt Heath is in Solihull Metropolitan Borough, and the council handles planning and building control. Most internal plastering needs no permission at all, but extensions, loft conversions, structural openings and changes to the outside of a house usually involve planning or building regulations, and sometimes both. If your house is listed or falls within one of Solihull’s conservation areas, check with the council before making any changes, including inside.
Green belt edges
Much of the land around Copt Heath is green belt, which limits new building on open land. That is one reason why so many owners extend or remodel the house they have rather than moving. It also means the planning department looks closely at the size and design of extensions, so plans tend to be well detailed by the time we see them.
Being a good neighbour
On quiet residential roads, vans, skips and noise all get noticed. We keep vehicles off verges where we can, keep the drive tidy, and keep noisy work like hacking off within normal working hours, Monday to Friday 7am to 5pm and Saturday 7am to 1pm.
Part seven: room by room in a Copt Heath home
Hallways and staircases
Large houses often have double-height hallways and long staircases. We set up proper staging which lets us reach the upper walls safely and keep one even finish all the way down. Hallways take the most knocks, so we fit beads to vulnerable corners and can use impact-resistant boards where helpful.
Living rooms
Living rooms are where old coving, ceiling roses and fireplaces are most likely to be kept. We can skim around retained features, or replace plain coving to match, so the room looks original once decorated.
Kitchens and utility rooms
Kitchen walls are often stripped back when units come out, revealing old tiles, damaged plaster and pipework chases. We make good, skim or re-plaster as needed, and use moisture-resistant boards where the design calls for it.
Bathrooms and en-suites
Bathrooms need careful choices. Where walls will be tiled, we often recommend tile backer board or moisture-resistant plasterboard without a skim, because tiles bond better to a suitable board than to smooth plaster. Ceilings and any painted walls get a skim on moisture-resistant board.
Bedrooms
Bedrooms are usually the simplest rooms, but in older houses they can have the worst ceilings, because they sit under the coldest part of the roof. Overboarding a bedroom ceiling and skimming the walls makes a big difference in a short time.
Part eight: the streams, the lanes and the ground
Purnell’s Brook and the Blythe
The old manor boundary at Purnell’s Brook is a reminder that Copt Heath sits on a gentle slope running down towards the River Blythe, which winds through the fields east of the M42. Footpaths from Copt Heath lead beside the motorway towards the river. Low-lying gardens near watercourses can be wetter than those higher up, and houses with suspended timber floors in those spots sometimes show damp in skirtings and lower walls where airbricks have been blocked by raised patios or flower beds.
Clay and trees
Like much of Solihull, the area has clay-rich ground, and Copt Heath has a lot of mature trees, both in gardens and along the golf course. In long dry summers, clay can shrink as trees draw moisture out of it, and in wet winters it swells again. That seasonal movement can open fine cracks in plaster, particularly where an original house joins a later extension built on different foundations. A crack that opens in late summer and closes again in winter is a classic sign. We record what we see, recommend a structural check if anything looks active, and use reinforcement at vulnerable junctions when we re-plaster.
Lanes that kept their character
Some of Copt Heath’s side roads still feel like country lanes, with hedges, wide verges and houses set well back. Access for plastering is usually easy, but long drives and gravel surfaces mean we plan where to park, how to barrow materials in, and how to keep mortar and plaster off block paving and stone.
Part nine: finishes and details owners ask for
A true flat finish
Many owners want walls and ceilings that look perfect under strong side lighting. On those jobs, we often recommend boarding or a two-coat plaster rather than a single skim over an old, wavy surface, because a skim follows the shape of what is underneath. Where the walls are reasonably straight, a careful two-coat skim with good preparation gives an excellent result.
Shadow gaps and minimal details
Contemporary interiors sometimes do without coving and traditional skirtings in favour of shadow-gap details, recessed skirtings and plaster-in profiles for LED strips. These need planning before boarding starts, because the profiles are fixed to the frame or wall and then plastered up to. We can work with the products your designer specifies and leave crisp, even lines.
Recessed shelving and TV walls
Built-in alcoves, recessed shelves and boarded TV walls with hidden cabling are common in family rooms and media rooms. We frame and board them with your joiner or builder, reinforce areas that will carry heavy screens with plywood or high-density board behind the plasterboard, and skim to a clean finish with sharp internal and external corners.
Large window and door reveals
Wide bifold and sliding doors create deep reveals and long heads. We line these with beads for straight edges and plaster them carefully so the reveals are square to the frame. Where frames are fitted before plastering, we protect them fully, as wet plaster can mark aluminium and painted timber.
Ceilings with many downlights
Modern ceilings often carry dozens of downlights, speakers and sensors. Cutting holes into a finished skim can chip the edges, so we prefer to agree positions with the electrician first. Where holes are cut afterwards, we make good any damage once fittings are in.
Heated floors and new screeds
If underfloor heating is being installed, the screed needs to dry before the heating is turned up gradually. That adds moisture to the room in the meantime. We plan plastering around the screed so walls and floor do not trap each other’s moisture, and so new plaster is not baked by a floor that has been brought up to temperature too quickly.
Part ten: buying, selling and settling in
Before a sale
Owners preparing to sell often want a quick refresh: cracked ceilings repaired, marks from old fixings made good, and a couple of rooms skimmed before redecoration. These jobs are usually quick and can make a noticeable difference to how a house photographs.
After a purchase
New owners often find problems once furniture comes out: old repairs, hollow areas or ceilings that were hidden behind textured finishes. We can look at the whole house, tell you which rooms need attention first, and plan the work in stages so you can live there while it is done.
Living in during the work
Families stay at home through most of the work we do here. We agree which rooms we need each day, keep a clear route through the house, and finish each day with the area swept and safe. If you have young children or pets, let us know so we can keep doors and gates closed and materials out of reach.
Part eleven: what to send us
When you contact us about work in Copt Heath, the most useful things to include are:
- Photos of each wall and ceiling involved, taken in daylight from a few angles.
- Close-ups of cracks, stains or damaged areas.
- Approximate room sizes, or a floor plan if you have one.
- A short note of what else is happening: rewiring, new kitchen, extension, damp work.
- Any drawings or specifications from your architect, builder or building control.
- When you would like the work done, and any dates to avoid.
With that, we can usually tell you how we would approach the job and whether a visit is needed before we quote for it.
Part twelve: the materials, explained
Plasterboard types
Standard plasterboard suits most walls and ceilings. Moisture-resistant board, usually green, goes in bathrooms, utility rooms and kitchens. Fire-rated board, often pink, is used where building regulations require it, such as around steel beams, in garage conversions next to living space, and on some loft ceilings. Acoustic boards are denser and help reduce noise. Insulated boards have a layer of foam bonded to the back and are used on cold walls or in conversions.
Backing plasters
Where walls are being re-plastered from brick or block, we choose a backing coat to suit the background. Bonding plasters grip smooth, dense or low-suction surfaces such as concrete lintels and engineering brick. Hardwall plasters are tougher and suit most block and brick. Lightweight backing plasters are easier to apply in thicker coats and help level uneven walls. In the oldest solid-walled houses, a lime-based backing can be more suitable than gypsum.
Finish plasters
The final coat is a thin multi-purpose or board finish, trowelled smooth. It is what you paint. Its quality depends on the preparation underneath and on timing: trowelling too early leaves a soft, uneven surface, and trowelling too late leaves marks that are hard to remove.
Beads, scrim and mesh
Angle beads give strong, straight corners. Stop beads form clean edges at frames and openings. Scrim tape covers plasterboard joints. Mesh and expanded metal reinforce areas where two materials meet or where cracks have formed. Small items, but they make a big difference to how long a finish lasts.
Part thirteen: plastering a whole house, step by step
Week one: strip out and assess
When every room is being plastered, the first stage is usually stripping: wallpaper, old tiles, loose plaster and damaged ceilings come out. Once rooms are bare, we look again at every wall and ceiling and confirm which areas will be skimmed, which re-plastered and which boarded. This is also when hidden problems appear, such as old water damage, timber decay or poorly supported openings.
First fix trades
Electricians and plumbers then run new cables and pipes, and any joiners fix new studwork and door linings. If walls are being chased, now is the time. It is far better to cut into old plaster than new.
Boarding and backing coats
Next come new ceilings and partitions in plasterboard, beads on corners and frames, and backing coats where walls have been stripped to brick or block. We usually work from the top of the house down, ceilings before walls, so drips and dust fall onto areas that have not yet been finished.
Skimming
Once boards are fixed and backing coats have set, we skim. In a large house this might be done room by room over several days, keeping a steady rhythm so each room can begin drying while we work on the next.
Drying, second fix and decorating
After the plaster has dried, second fix trades fit sockets, switches, radiators, doors and skirtings. Decorators then mist coat and paint. Small fixings and shrinkage cracks at board joints are normal and are dealt with by the decorator. Anything more than that, we come back and look at.
Part fourteen: annexes, pool rooms and outbuildings
Annexes for relatives
Big plots make it possible to build a self-contained annexe so a parent, or a son or daughter, can live close by, either attached to the house or as a separate building. These are often built to a high standard of insulation and need the same quality of finish as the main house. We board and skim them throughout and pay attention to accessible details such as wide, straight reveals and robust corners where mobility aids may knock them.
Pool rooms and gyms
Indoor pools, hot-tub rooms and home gyms create a lot of moisture. Plaster in these spaces has to be chosen with care: moisture-resistant boards, specialist backgrounds and a properly designed ventilation system. Standard gypsum finishes in a humid pool room will break down. If you are planning one, we will want to see the designer’s specification before we quote.
Old outbuildings
Some older Copt Heath properties still have brick stables, coach houses or workshops. Converting them brings the same challenges as any older building: solid walls, uneven surfaces and damp at low level. We look at how the building is used now and how it will be heated, then suggest a lining and plaster approach to suit.
Part fifteen: mistakes we are often asked to put right
Plaster over a damp wall
The most common failure we see is new plaster put straight onto a damp wall without fixing the cause. Within months, it stains, blisters or comes away. We will always ask what has been done about the damp before re-plastering.
Painting too soon
Painting fresh plaster with a full-strength vinyl emulsion before it is dry seals moisture in and can make the paint peel. Allow the plaster to dry fully, then use a thinned mist coat that the surface can absorb.
Skimming over gloss or loose paint
Plaster will not bond reliably to gloss paint, flaking emulsion or old distemper. These surfaces need to be scraped, sanded or treated with a suitable primer or bonding agent first. Skipping that step leads to sections of skim cracking and lifting.
Fixing into green plaster
Drilling and fixing shelves, curtain poles or TV brackets into plaster that has not dried can crack and loosen the finish around the fixing. Wait until the room has dried and been decorated before putting up anything heavy.
Part sixteen: why experience matters on these houses
The team has 62 years of combined experience. On Copt Heath jobs, that shows mainly in the planning: spotting where an old wall meets a new extension, how a long ceiling will look under downlights, which textured ceilings need testing, and how to fit plastering into a bigger project without holding up other trades. RCR Connections Ltd explains what we find, gives you clear options and leaves the house clean and ready for decoration.
Rendering at Copt Heath
We also render, using K-Rend monocouche and silicone systems, polymer base coats with silicone top coats, and traditional sand and cement. In Copt Heath that usually means re-rendering tired gables, rendering new extensions to match or contrast with the house, or replacing old pebble-dash. Read more on our rendering in Solihull and K-Rend monocouche pages.
Other pages near Copt Heath
For nearby areas, see plastering in Solihull, plastering in Bentley Heath, plastering in Balsall Common, plastering in Olton and our plasterer in Shirley page. Every town and service we cover is on our plastering and rendering services page. To get started, WhatsApp us on 07453 614095 or send a message through the page.
Copt Heath homes we plaster
Copt Heath has large detached houses near the M42, with villages and hamlets close by. Here’s where we work most, the homes you’ll find there and the plastering jobs that come up.
- Copt Heath and the Warwick Road. Large detached houses. High ceilings, coving and big extensions.
- Catherine-de-Barnes. Village homes. Kitchen extensions and ceilings.
- Barston. Older houses and farmhouses. Lime repairs.
- Hampton-in-Arden. Cottages and village houses. Lath ceilings.
- Temple Balsall. Old village houses. Careful repairs.
- Widney Manor. Larger houses. Rooms replastered after a rewire.
- Bentley Heath. Interwar to 1970s homes. Artex ceilings covered.
Whatever the house, RCR Connections Ltd puts 62 years of combined experience into it. We’re Birmingham based, covering the whole of the Midlands, and we work Monday to Friday 7am to 5pm and Saturday 7am to 1pm. WhatsApp me on 07453 614095 or message the page with photos of the room and your road or postcode in Copt Heath.
Outside, we also fit K-Rend monocouche and silicone render for homes around Copt Heath, see rendering in Solihull. Just east, we’re also the plasterer in Hampton-in-Arden.
What our customers say
Was amazed by the punctuality from them as far as tradesmen go and the experience was stress-free with a great finish to my maisonette.
James Tranter
We chose them for our home extension, and the transformation was amazing. Their work is top-notch, and I’d recommend them to anyone seeking both quality and luxury in construction.
Emma S
These guys were great lads, grafted hard, and was really happy with the price and the end result. Blimey, it was outstanding!
Michael T
Very impressed with the workmanship and attention to detail. The project was completed on time and exceeded my expectations!
Sophia Reynolds, Property Manager
Our services
More services: Plastering repairs · Plastering and coving · Plastering extensions and lofts.
Plastering in Copt Heath: common questions
Do you cover Copt Heath and the surrounding area?
Yes. RCR Connections Ltd is Birmingham based, covering the whole of the Midlands, and works across Copt Heath and Solihull and the surrounding villages. We also cover plastering in Solihull, rendering in Solihull and Hampton-in-Arden. For the full list, see areas we cover.
How do I get a plastering quote in Copt Heath?
WhatsApp photos of the walls or ceilings to 07453 614095, with rough room sizes and what you would like done. We will come back with a free, no-obligation quote, or arrange a visit if the job needs a closer look.
Which parts of Copt Heath and the area around it do you cover?
All of Copt Heath and the villages and areas around it. That includes Catherine-de-Barnes, Barston, Hampton-in-Arden, Temple Balsall, Widney Manor and Bentley Heath.
Can you replaster a room after a rewire?
Yes. A rewire leaves chases and patches all over the walls. We fill the chases, and if the old plaster has come away we take it back and replaster the whole wall or room, ready for decorating.
Do you plaster new extensions and loft rooms in Copt Heath?
Yes. Once your builder has the walls up and boarded, we plaster the walls and ceilings so the new room matches the rest of the house.
How soon can I decorate after plastering?
A skim usually needs a few days to dry, and thicker backing coats need longer, depending on ventilation and the time of year. Wait until the plaster is an even pale colour all over, then start with a mist coat (watered-down emulsion).
Can you plaster over Artex?
Yes. We can skim over Artex, or over-board and skim ceilings that are cracked or uneven. If the Artex went up before 2000, have it tested for asbestos before anyone scrapes or sands it.
What hours do you work?
Monday to Friday 7am to 5pm and Saturday 7am to 1pm.
