Cannock grew from a small market town into a coal town, and then into the busy commuter and shopping centre it is today. That history shows on its houses. There’s Georgian stucco at the top of the town, Victorian red brick in Bridgtown, rows of colliery-era terraces, and large estates of 20th-century semis and bungalows. RCR Connections Ltd renders homes right across the district, from repairs to a single gable to full re-renders. We work with traditional sand and cement, lime for older walls, thin-coat silicone, insulated render systems, and K-Rend monocouche and other one-coat renders that hold their colour through the whole coat. The team has 62 years of combined experience.
For walls and ceilings inside, see our page on plastering in Cannock, which covers plastering, re-plastering and repairs.
This page is set out as the questions people in Cannock most often ask us when they’re thinking about rendering. Along the way, we look at what Cannock Chase District Council has written about the town’s buildings, because it helps explain why certain finishes suit certain houses.
What does the council say about Cannock’s historic buildings?
Eight conservation areas
Cannock Chase District Council has designated eight conservation areas. Four are in or around Rugeley: Rugeley Town Centre, Church Street, Talbot Street/Lichfield Street and Sheep Fair/Bow Street. The others are Cannock Town Centre, Bridgtown, Main Road in Brereton, and the Trent and Mersey Canal. The council’s records show the first, Rugeley Town Centre, was designated in 1973, and the most recent, Sheep Fair/Bow Street, in 2004.
The town centre appraisal
The council’s 2016 appraisal of Cannock Town Centre conservation area, first designated in November 1991, gives a clear picture of the materials that define the place. It names dark orange or red brick, cream and white render, stucco and painted brick as the characteristic materials, with red sandstone for St Luke’s Church and the Conduit Head. Most of the historic brick buildings are laid in Flemish bond.
The appraisal also defines stucco as “a plastered finish, used historically instead of stone”, explaining that it was seen as more fashionable than brickwork. That’s why it was used on the White House, the mid-18th-century Georgian building with a parapet roof at the head of the town.
Light render on the streets
Describing the curve of buildings near Wolverhampton Road, the appraisal mentions two-storey, mainly 19th-century buildings with chimneys and facades in light coloured render. It also picks out the white painted gable end of No. 26 at the junction with Queen Street, which closes views down Wolverhampton Road. On Market Place, it describes a mix of red brick and light coloured render, and the concrete, Art Deco inspired front of No. 13.
So pale render isn’t a modern intrusion in Cannock. It has long been part of how the town looks.
Which buildings show the town’s older finishes?
A short walk around the centre
If you want to see how render, stucco and paint have been used in Cannock over the centuries, a walk from High Green down to Market Place covers most of it.
At the north end, the appraisal describes a historic group formed by the White House, the red sandstone Conduit Head and the bowling green. The Conduit Head was built by public subscription, and the appraisal says the quality of its water gave Cannock a reputation as a spa town that attracted wealthy families.
Nearby, 79 High Green is described as a building of vernacular form with painted brick filling an earlier timber frame, probably with 16th-century origins. It was Linford’s ironmongers for many years before becoming The Linford Arms. Just south, the substantial early 19th-century buildings at 71 to 77 High Green have a moulded doorcase, a projecting timber shopfront and moulded plaster eaves.
Further down, Nos. 14 to 16 Market Place carry a stone plaque reading “Gladstone Villas 1895”, and the appraisal suggests they were originally houses.
Market Place landmarks
The appraisal also records the war memorial of 1923, with figures of a soldier and a sailor, and the clock unveiled in 1935 in memory of Henry Benton, a local butcher who left money to the town for a four-faced electric clock. The northern bandstand’s stone platform marks the coronation of Edward VII in 1902, and a memorial anchor inside it marks 25 years of twinning with Datteln, which began in 1971.
None of these are houses, but they show the mix of brick, stone, render and paint that gives the town centre its look.
How old is the town, and does that affect rendering?
From market town to coal capital
The appraisal records several milestones. The bowling green in the town centre was enclosed in 1753, and water was piped into the town in 1736 to the hexagonal stone Conduit Head. The weekly market was re-established in 1868 when a market hall was built.
Coal changed everything. The appraisal says coal was mined in the area from at least the early 19th century, and that by the end of that century, half of southern Staffordshire’s coal came from the greater Cannock area. Canals followed the mines: the Staffordshire and Worcestershire Canal opened along the western edge of the Chase in 1772, the Hatherton Branch was built in 1839, and the Cannock Extension Canal in 1863. A County Mining College was established in the town centre in 1928.
Why the age of a house matters
The age of your house tells us a lot about how its walls were built:
- 18th and early 19th century: solid brick, soft lime mortar, and often lime render or stucco on the front.
- Later Victorian: solid brick, usually harder and more regular, with brick detailing meant to be seen.
- Inter-war: cavity walls become common, often with pebbledash or roughcast on the upper half.
- Post-war: cavity brick and block, with a wide variety of render, cladding and some non-traditional construction.
- Late 20th century onwards: cavity block with modern renders, or brick with render panels.
Each of these needs a different approach. Hard cement on soft lime-mortared brick can trap moisture, for example, while a modern block wall can take almost any system.
What happened in Bridgtown?
An edge-tool settlement
Bridgtown sits just south of the town centre, near where Watling Street meets the Walsall Road at Churchbridge. The council’s appraisal says the conservation area, designated in November 1988, covers shops and buildings along North Street and parts of Union Street and Church Street. Until the 1870s the area was open land. The roads were laid out by 1876, and building then followed quickly.
The appraisal explains that the main industry was edge-tool making: chisels, spades and other tools with a cutting edge. In the 18th century, William Gilpin, son of a Wolverhampton edge-tool maker, came to own a flour mill through marriage. By 1790 it had been turned into a factory making edge tools, and as production grew a new factory was set up at Churchbridge in 1806. The appraisal adds that Gilpin’s former employees went on to open their own works, and one small works still survives at the junction of Walsall Road and East Street.
Brick and tile
The houses were built from bricks of locally produced Etruria marl, and the appraisal says Longhouse Tileries was in production by 1868. It describes the North Street buildings as two storeys of red brick, some painted brown or cream in recent years, under plain red and blue clay tiles or blue slate. The Wesleyan Methodist Church on Union Street dates from 1909, and St Paul’s Church was built in 1899, replacing a cast-iron church of 1876.
Rendering Victorian brick
Houses of this type were designed to show their brick. If you’re thinking of rendering one, especially in the conservation area, check with the council first. Outside the conservation area, rendering a Victorian terrace can be a sensible way to deal with badly weathered brick, but it needs a breathable system and careful detailing at the eaves and around window heads.
Free, no-obligation quote in Cannock: WhatsApp me on 07453 614095 with a few photos, or send us a message.
Is painted brick a good alternative to render?
The town centre appraisal lists painted brick among the area’s characteristic materials, and Bridgtown has examples too. Painting is quicker and less disruptive than rendering, and it suits houses where the brickwork is sound but the colour or patching is unattractive.
It has limits, though:
- Paint doesn’t hide uneven brickwork, cracks or badly matched repairs.
- Non-breathable masonry paints can trap moisture in older walls, leading to flaking.
- Once painted, brick is very hard to return to its natural finish.
- Painted walls need redoing every few years to stay smart.
Render is the better option where the brick itself is damaged, where the wall needs extra protection from rain, or where you want a flat, uniform finish. If you’re undecided, we can look at your wall and explain what each option would involve.
What are the common render problems in Cannock?
Cracking
Hairline cracks are common in older sand and cement render and aren’t always serious. Wider cracks, or cracks that follow a pattern, such as stepping across a wall or running from window corners, can let water in. Once water gets behind render, it can freeze and push the render away from the wall.
Hollow, blown patches
Tap a rendered wall with your knuckle. A dull, hollow sound means the render has lost its bond. Small blown areas can be cut out and patched. Large areas, or several patches across one elevation, usually mean the wall needs stripping and re-rendering.
Staining and algae
Green and black staining is common on north-facing walls and walls shaded by trees. It’s more noticeable on pale render. Cannock Chase is close to many homes in the district, and the appraisal records the Cannock Chase AONB was designated in 1958 and covers around 6,900 hectares. Walls near trees and woodland stay damp longer, which encourages growth. A biocide wash cleans most render, and modern silicone finishes resist algae better than plain cement.
Failing pebbledash
Many inter-war and post-war houses in the district have pebbledash. When it fails, you’ll see bald patches where stones have dropped off, cracks, and areas that sound hollow. It can be repaired if the failure is limited, but matching old pebbledash is hard. Often the better long-term answer is to strip it, or to apply a new system over a sound base after preparation.
Damp inside
Damp patches inside can be caused by render problems, but also by gutters, downpipes, failed seals around windows, or ground levels. We’ll look at all the likely causes before recommending any work.
What about mining-era terraces and cottages?
Built quickly, built plainly
The appraisal says the villages around Cannock grew up as mining settlements, and that brick and tile works around Bridgtown supplied the expansion of house building. Many homes from that period were built fast, with modest foundations and solid brick walls one brick thick.
Common features of these houses include:
- Front walls of facing brick, with plainer common brick at the sides and back.
- Rear outshots and kitchen extensions added later in different materials.
- Chimney stacks that have been taken down or capped.
- Walls patched over the years with cement, sometimes in several colours.
Rendering an older terrace
When a terrace’s back wall has been patched so often that it looks untidy, render can bring it back together. On a solid brick wall, the system needs to let moisture out. Lime, or a breathable modern render designed for older masonry, is often the right choice. Where a back wall has already been rendered in hard cement that’s cracking and holding damp, we’d usually recommend taking it off rather than rendering over the top.
Neighbouring houses
On a terrace, one house’s render meets the next house’s brick. A neat stop bead and a clean vertical line at the boundary make the finish look deliberate. We’ll talk to you about where your wall ends, and it’s polite to let your neighbours know when scaffolding is going up.
What about post-war council and estate houses?
A wide mix
After the Second World War, large numbers of new homes were built across the district, by councils and by private builders. Some were conventional brick. Others, across the West Midlands and the country generally, used non-traditional methods such as concrete panels or steel frames to speed up building.
Non-traditional construction
If your house is of non-traditional construction, the walls may not be brick at all. Some types are designated as defective under housing law and need a specialist repair scheme before a mortgage lender will accept them. Rendering over such a wall without the right repairs can hide problems rather than solve them.
If you’re unsure what your house is built from, your purchase survey or a structural surveyor can identify it. We’ll tell you if we think a wall needs checking before any render goes on.
Conventional semis and terraces
For ordinary brick or block houses from this period, most render systems are suitable. Pebbledash that has failed can be stripped or overcoated, and through-coloured and silicone renders are both popular choices for giving these houses a cleaner, more up-to-date look.
Can you render just one part of the house?
Yes. Common partial jobs include:
- An extension rendered to match or contrast with the main house.
- A gable end that’s weathered badly or was built in mismatched brick.
- A plinth at the bottom of the wall, often in a darker colour, to hide splashes.
- The upper storey only, a look that’s common on inter-war houses.
- Garden walls and pillars, often rendered to match the house.
Partial work needs careful thought about where the render stops. Beads at the edges give a clean line, and the junction with brickwork needs to shed water rather than trap it.
Will render make my house warmer?
Plain render on its own adds very little insulation. What it can do is stop driving rain soaking into a porous wall, and a dry wall loses less heat than a wet one.
For a real gain in warmth, insulated render is the option. Boards of insulation are fixed to the wall, then covered in mesh and render. These systems are most useful on solid-walled houses, which don’t have a cavity to fill.
Before choosing insulated render, think about:
- Whether there’s room at the eaves and verges for the extra thickness.
- How window sills, pipes, meters and satellite dishes will be moved out.
- Whether the house is in a conservation area or has any planning restrictions.
- How the system handles moisture in the wall behind it.
What colours suit Cannock?
The town centre’s historic render is mostly cream and white, according to the appraisal, which also describes buildings painted brown or cream in Bridgtown. That’s a useful starting point if your house is older or near the centre.
On modern estates, people choose anything from bright white to soft grey and stone tones. A few tips:
- Very bright white shows dirt and algae faster.
- Darker colours can absorb more heat, and some systems limit how dark you can go.
- Mid-tone greys and creams tend to stay looking clean the longest.
- Contrasting plinths or bands can break up a large wall.
Ask for physical samples rather than relying on a screen. Colours look very different outdoors.
What about bay windows, porches and other details?
Details are where render jobs succeed or fail. On older houses, look at:
- Bay windows, which often have timber or lead parts that need protecting or repairing.
- Window and door heads, where water can collect if there’s no drip.
- Porches and canopies, which need flashing where they meet the rendered wall.
- Sills, which need to project far enough to throw water clear of the render below.
- Air bricks and vents, which must be kept open and extended through the new render.
We’ll walk around the house with you and point out every detail that needs special treatment.
How do I keep rendered walls clean?
Every render picks up some dirt over time. To keep it looking good:
- Wash it gently with a soft brush and water once a year.
- Treat algae with a biocide made for render, following the directions.
- Avoid high-pressure washers on thin-coat renders, which can damage the surface.
- Cut back trees and shrubs so the wall gets more sun and air.
- Repaint sand and cement render when the paint starts to look tired.
Through-coloured and silicone renders are usually the easiest to look after, because they don’t rely on paint and tend to shed dirt with rain.
K-Rend in Cannock: rendering across the town and the Chase villages
Cannock grew fast with the coal mines, so much of the town is mining-era terraces, inter-war council estates and post-war and modern housing, with the Chase on the doorstep. K-Rend monocouche and silicone render suits most of those homes. RCR Connections Ltd is Birmingham based, covering the whole of the Midlands, and Cannock is a short run up the A5 from us. These are the parts of the area we work in most, the houses you find there and the K-Rend jobs they usually need.
- Chadsmoor and Bridgtown. Mining-era terraces and early 20th-century homes, often with plainer brick at the back and rendered rear outriggers. Patched back walls come up well in K-Rend monocouche or a breathable silicone system, finished above the damp course.
- Pye Green, Blackfords and Longford. Inter-war and post-war estates with grey pebbledash and roughcast on the upper floors. We test it, strip what is loose and finish in through-coloured K-Rend, so the fronts never need painting again.
- Heath Hayes and Norton Canes. Old mining villages that now have a lot of newer housing. Gable ends, side extensions and garage conversions in K-Rend are common jobs. Old mine workings can cause slight movement, so we use mesh in the base coat where it is needed.
- Hednesford, West Hill and Rawnsley. Terraces near the centre and larger homes on the slopes towards the Chase, where walls take more weather. Our page on rendering in Hednesford has more detail on that side of the district.
- Huntington, Cheslyn Hay and Great Wyrley. 1960s to 1980s semis and bungalows, plus newer estates, many with painted render or panels under the windows. Swapping those for one K-Rend or silicone finish makes the front read as one surface. Heading south towards Bloxwich, see rendering in Walsall.
- Rugeley, Brereton and the Burntwood side. Older terraces and post-war estates in Rugeley and Brereton, and homes along the A5 towards Burntwood. For homes nearer the city, our page on rendering in Lichfield covers that side.
Wherever you are in Cannock, the first step is the same: WhatsApp me on 07453 614095 or message the page with a photo of each side of the house and your road or postcode. We work Monday to Friday 7am to 5pm and Saturday 7am to 1pm, and between us we have 62 years of combined experience.

Which render system suits which house?
Sand and cement
Traditional, strong and widely used, finished smooth, floated or textured, then painted. It needs repainting over time, and it can crack as it ages. It’s best on sound modern masonry.
Through-coloured monocouche
Through-coloured renders such as K-Rend monocouche are coloured right through, applied in one or two passes, and usually given a scraped finish. They don’t need painting. They suit modern brick and block houses, extensions and new builds. Read more on our K-Rend monocouche rendering page.
Silicone
A thin-coat render on a base coat and mesh. It’s flexible, water-repellent and available in many colours. It’s a good choice for houses where cracking has been a problem and where staining is a worry.
Lime
The right choice for older solid-walled buildings, especially in conservation areas. Lime is softer and breathable, allowing moisture to escape from the wall. It’s slower to apply and needs protection from frost and fast drying while it cures.
Insulated render
Insulation boards fixed to the wall, then mesh and a render finish. These systems make solid-walled houses warmer. They thicken the wall, so window sills, downpipes and roof overhangs need adapting, and planning permission may be needed in some places.
Our comparison of K-Rend monocouche, silicone and sand and cement render goes into the differences in more detail.
Should I repair the old render or start again?
This is one of the most common decisions we help people make. Here’s how we think about it.
Repair makes sense when
- Damage is limited to a few small areas.
- The rest of the render is firmly bonded and sounds solid when tapped.
- The render is the right type for the wall behind it.
- You’re happy for the repairs to be painted over so they blend in.
Starting again makes sense when
- Large parts of the wall sound hollow.
- Cracks are widespread or keep coming back after filling.
- The render is too hard for an older wall and is trapping damp.
- You want a different finish, such as a through-coloured or silicone render.
- Earlier patch repairs have left a wall that looks uneven however it’s painted.
The middle ground
Sometimes a sound but tired sand and cement render can be prepared and then overcoated with a thin-coat system, such as a silicone finish on a base coat and mesh. This avoids the mess of full removal, but only works when the existing render is well bonded. We’ll test it before suggesting this route.
How does the weather around the Chase affect render?
Cannock sits on the southern edge of Cannock Chase, and parts of the district stand on higher, more open ground. Exposed walls get more wind-driven rain, and walls in the shade of trees stay damp longer.
Practically, that means:
- Exposed gable ends benefit from water-repellent finishes and good drip details.
- Walls near woodland are more prone to algae and need cleaning more often.
- Freezing nights in winter make any trapped water expand, so small cracks grow faster on exposed walls.
- The render must be fully cured before the first frosts, which limits how late in the year some work can be done.
How can you tell if render was badly applied?
If you’ve moved into a house with fairly recent render, or you’re checking work done by someone else, look for:
- Cracks running from the corners of windows and doors, which can mean no mesh or reinforcement at stress points.
- Render running down to the ground with no gap or bead above the damp-proof course, which can let damp climb.
- No drips over windows or at the bottom of the render, so water runs back against the wall.
- Patchy colour in a through-coloured render, which can come from mixing errors or applying in unsuitable weather.
- Hollow areas within a few years of application, suggesting poor preparation of the wall.
Some of these can be put right with targeted repairs. Others need the affected area stripped and redone.
What about Hednesford, Heath Hayes and Norton Canes?
These parts of the district grew alongside the collieries, and later spread with estates of semis, bungalows and newer housing. The mix of houses is similar to Cannock’s outer areas: older terraces and cottages close to the old village centres, and mostly 20th-century homes around them.
Our separate page on rendering in Hednesford covers that town in more detail. For Cheslyn Hay, Great Wyrley and the Walsall side, see our Walsall rendering page.
And Rugeley and Brereton?
Half of the district’s conservation areas are in and around Rugeley, according to the council’s list, with another at Main Road, Brereton, and one following the Trent and Mersey Canal. If your home is in one of them, follow the same approach as in Cannock: speak to the council before any change to the outside, and choose materials that suit the age of the building.
Do I need planning permission to render my house?
In general
For most houses outside conservation areas, rendering is often allowed without planning permission as long as the finish is similar in appearance to existing houses nearby. Rules change, and some estates have conditions or covenants, so always check with Cannock Chase District Council before committing.
Conservation areas and listed buildings
In conservation areas, changes to the outside of buildings get more scrutiny. If your house is listed, you’ll need listed building consent for most work, including rendering, removing render or changing materials. The council’s conservation team is the right first contact.
Building regulations
Some rendering work, especially insulated systems or substantial work on a wall, can bring building regulations into play. We’ll tell you if that’s likely for your job.
What does a typical render job involve?
Survey and quote
We visit, look at the walls, test for hollow areas and talk about what you want. We’ll explain which system we recommend and why, then follow up with a written quote.
Scaffolding
Most render jobs need scaffold. We arrange it and make sure it’s safe and properly tied.
Preparation
This is the most important stage. Old render may be stripped, loose material removed, cracks repaired, and beads fitted at corners, window reveals and the bottom of the render. Windows, doors and surfaces are masked.
Application
Depending on the system, this can be a base coat, mesh and topcoat, or one or two passes of a monocouche, or several coats of sand and cement or lime. Weather matters: we don’t render in frost, heavy rain or very hot sun.
Finishing and clean-up
Once the finish is on and cured, the masking comes off, the site is cleaned, and the scaffold is struck.
How long does render last?
That depends on the system, the quality of the work, the condition of the wall behind, and how well it’s maintained. Sand and cement render that’s painted regularly can last a long time. Through-coloured and silicone renders stay looking good for many years with occasional cleaning.
Maintenance tips:
- Clear gutters and downpipes, and fix leaks quickly.
- Keep plants and soil away from the bottom of the render.
- Clean algae before it builds up.
- Repair cracks before water gets in and freezing makes them worse.
Our article on signs render needs repairing before winter has a checklist.
Can render be done in winter?
It can, but with care. Cement and lime renders shouldn’t be applied when frost is expected, and some thin-coat finishes need minimum temperatures to cure. We plan winter jobs around forecasts and may use protective sheeting on the scaffold. In practice, late spring to early autumn is the easiest time to render, so it’s worth booking ahead.
If a repair is urgent, such as a section of blown render that’s letting water in, a temporary fix can protect the wall until the weather improves. That might mean cutting out loose render and sealing the edges, or fixing a gutter that’s soaking the area. The full repair then follows when conditions allow the new render to cure properly. Leaving a damaged wall exposed through a whole winter usually makes the eventual job bigger.
Do you render new extensions and new builds?
Yes, and new blockwork is one of the easiest backgrounds to render. Lightweight and dense blocks behave a little differently, so the system needs to match. A few points help new work go smoothly:
- Give the blockwork time to dry out after building, especially after a wet spell.
- Fit window and door frames before render starts, so beads and reveals can be finished neatly.
- Plan where pipes, vents, meters and lights will go, so we can leave openings or fit them after.
- Agree whether the extension should match the house or deliberately contrast with it.
Through-coloured monocouche and silicone renders are popular for extensions because they look crisp and need no painting.
What about damp-proof courses and ground levels?
The bottom of a rendered wall is the area most likely to cause trouble. If render runs down past the damp-proof course and into the ground, it can draw moisture up and bridge the protection the course is meant to give.
We usually finish render above the damp-proof course with a bellcast or stop bead, which throws water away from the wall below. If paths, patios or flower beds have been built up too high against the wall, they should be lowered or set back before rendering. On older houses that never had a damp-proof course, we take extra care to keep the bottom of the wall able to dry out.
What questions should I ask any renderer?
Whoever you choose, it’s worth asking:
- Which system do you recommend for my wall, and why?
- Will the old render be removed, and how will the wall be prepared?
- Where will beads, drips and stops go?
- How will windows, doors, pipes and vents be handled?
- What happens if the weather turns during the job?
- Can I see photos of similar work you’ve done?
Good answers to these questions tell you more than a brochure ever will.
Do you also work on shops and commercial premises?
Yes. Much of Cannock town centre is shops with offices or flats above, and render work on these buildings has extra things to plan:
- Working hours that suit the business and its customers.
- Scaffold licences and pedestrian protection on busy pavements.
- Protection for shopfronts and signs while work goes on above.
- Access to upper floors and rear yards.
The appraisal notes that the town’s historic buildings make an important contribution to small business accommodation. If your premises is in the conservation area, check with the council before changing the finish of the front.
What do I need to do before work starts?
- Agree a start date and a likely finish date.
- Tell your neighbours about the scaffold and any access we’ll need.
- Clear the area around the house, including bins, pots, garden furniture and anything along the walls.
- Move cars away from the drive if the scaffold blocks it.
- Let us know about alarms, security lights or cameras fixed to the walls.
- Arrange for any satellite dishes, cables or aerials to be removed if needed.
Can you help inside too?
Yes. As well as rendering, we plaster walls and ceilings. If damp has come through from a failed render, we can sort the outside first and then replaster the damaged rooms once the walls have dried. Our plasterer in Lichfield and plasterer in Wolverhampton pages describe our interior work in nearby towns.
Where do you work around Cannock?
We work in Cannock town centre, Bridgtown, Chadsmoor, Hednesford, Heath Hayes, Norton Canes, Huntington, Cheslyn Hay and Great Wyrley, plus Rugeley and the villages around the Chase.
Related pages:
- Rendering in Hednesford
- Rendering in Walsall
- Rendering in Tamworth
- Plasterer in Lichfield
- Plasterer in Wolverhampton
You can also see our projects, or read about all our plastering and rendering services.
Our services
More services: Rendering with sand and cement · Rendering new extensions.
Rendering in Cannock: common questions
Do you cover Cannock and the surrounding area?
Yes. RCR Connections Ltd is Birmingham based, covering the whole of the Midlands, and works across Cannock and south Staffordshire. We also cover Tamworth, Birmingham and Coventry. For the full list, see areas we cover.
How do I get a rendering quote in Cannock?
WhatsApp me on 07453 614095 or message the page with photos of each side of the house, and tell us what finish you have in mind. We will come back with a free, no-obligation quote, or arrange a visit to look at the walls first.
Do you do K-Rend in Cannock?
Yes. K-Rend monocouche and silicone render is our main rendering system, and we fit it on houses, extensions, garage conversions and garden walls right across Cannock, from Chadsmoor and Bridgtown to Pye Green, Heath Hayes, Norton Canes and Huntington. WhatsApp me on 07453 614095 or message the page with photos for a free quote.
Which render is right for my house?
It depends on the wall, the house and the look you want. We work with sand and cement, silicone, through-coloured monocouche (such as K-Rend monocouche) and insulated render, and we will recommend one after seeing the wall. Our guide K-Rend monocouche vs silicone vs sand and cement render explains the differences.
Can you render an old mining terrace in Chadsmoor?
Yes. Many of these terraces have solid brick walls, so we look at the wall first and often use a breathable silicone system rather than hard cement. Rear outriggers and patched back walls are the most common jobs, and we keep the render clear of the damp course.
My house is near old mine workings. Can it still be rendered?
Usually, yes. Slight movement is common round Cannock and Heath Hayes. We look at any cracks first, and if they are wide or still growing we ask you to get an engineer to look before we start. Mesh in the base coat helps the render cope with small movement.
What hours do you work?
Monday to Friday 7am to 5pm and Saturday 7am to 1pm.
