Stratford-upon-Avon has more variety in its walls than most towns its size. Within a few streets you can pass timber-framed houses, Georgian brick fronts, rendered classical facades, Victorian villas and modern estates. RCR Connections Ltd renders houses across the town and the district from our Birmingham base, and this page is written for owners who want to understand which approach suits which kind of building before they ask for quotes.
The team has 62 years of combined experience. We work with sand and cement, with coloured through-render such as K-Rend monocouche and other one-coat systems, and with thin silicone finishes on suitable backgrounds. We don’t work on historic lime finishes ourselves, and where a building needs one we’ll say so and point you to a specialist.
The page follows the town’s building history from the medieval street plan onward, because the age of a house is the best guide to what its walls can take. It then covers planning, the practical side of a rendering job, and the villages we cover nearby.
The medieval plan still shapes the town
Stratford-on-Avon District Council’s 1992 conservation area report describes a planned town laid out on a gridiron, with long narrow burgage plots running back from the street frontages. Alleys and archways led through to the backs of the plots, and many of those routes still exist. The report notes that some of the main roads, among them Alcester Road, Greenhill Street, Wood Street and Bridge Street, follow the line of an older Roman route.
The river crossing was the reason the town existed at all. A ford gave way to a bridge, and the report credits the present Clopton Bridge to the generosity of Sir Hugh Clopton. Beyond the bridge, the town eventually spread over the river into Bridgetown.
For anyone thinking about render, that plan matters in a practical way. Narrow frontages with deep plots mean that the side and rear walls of many central buildings are hard to reach, often only through an alley or a neighbour’s yard. Scaffold access and the protection of shared passages need sorting out early.
Fire, thatch and a change of roofs
The report records serious fires in 1594, 1595 and 1614. After them, the corporation banned thatch and required tile roofs instead. Much of the town was timber-framed at the time, and timber framing remained common for a while after the fires, but the shift to tiled roofs was the first big change in how the town was built.
The arrival of brick
The report dates the introduction of brick to the late 17th century, using local clays from the west of the town. Brickworks soon followed, and their product gave Stratford a characteristic look: two tones of brick laid in Flemish bond, with lighter-coloured headers set against darker stretchers to produce a chequered pattern. You can still pick out that chequered brickwork on many buildings in the centre.
That’s directly relevant to rendering. Good-quality historic brickwork, especially patterned brick, is usually part of a building’s character, and covering it with render is rarely acceptable in a conservation area. It also tends to be unnecessary, since sound brick sheds weather well on its own.
Georgian fronts over older frames
In the 18th century, the report says, many timber-framed buildings were given brick facades, partly from fashion and partly from a dislike of timber framing, which had come to look poor and old-fashioned. By the late 19th century, it notes, High Street looked largely Georgian.
Then the fashion turned again. Nineteenth-century enthusiasts, keen on the town’s link with Shakespeare, removed brick fronts and rendered classical facades to expose the timber framing behind. The report is candid that this often involved heavy rebuilding, so some of what looks medieval in the centre today is partly Victorian reconstruction.
Why this matters for owners
It means you can’t always tell from the street what a front wall is made of. A rendered classical facade might be brick, might be timber frame with a brick skin, or might be a mix built up over several centuries. Before any work on an older central building, we’d want to see what the wall is from inside and, where possible, from a small opening up, ideally with advice from the council’s conservation officers.
The Victorian and later town
The report outlines how the 19th century brought new growth. A tramway opened in 1826, running towards Moreton-in-Marsh, and the timber yard by the river is a reminder of that period. The Garrick Jubilee of 1769 had already started to draw visitors, and the Memorial Theatre opened in 1879.
To the north and east, the Borough laid out roads for large houses, among them Welcombe Road, St Gregory’s Road, Avenue Road, Maidenhead Road and Rowley Crescent. These are where you’ll find many substantial Victorian and Edwardian villas, typically in brick with decorative detailing, some with rendered or roughcast sections.
Later in the 20th century the town expanded in all directions, and most of the houses we’re asked to render in Stratford today are from that later growth: inter-war semis, post-war estates, and houses from the 1960s onward, plus extensions to all of them.
The six parts of the conservation area
The 1992 report splits the conservation area into six parts, each with a different feel. Knowing which one a building sits in gives a quick idea of how sensitive the setting is.
- Area A, the river: dominated by the Avon and its banks, with more green space than buildings. The report notes the Bancroft area was drained, and two canal basins there encouraged trade.
- Area B, north to the canal: the streets between the medieval centre and the canal.
- Area C, west to the railway: the part of town reaching out to the railway lines.
- Area D, south and Old Town: the older southern end, including the area around the parish church.
- Area E, the medieval heart: the gridiron of streets that make up the historic core.
- Area F, beyond the canal to the north: the later growth across the canal.
The report also identifies seven principal approach roads into the town, and comments on how each one shapes a visitor’s first impression. It singles out the Tiddington, Banbury and Shipston approaches as having a certain quality, while being less complimentary about some others.
Canal, tramway and river trade
The Stratford-upon-Avon Canal opened in 1816. Together with the tramway of 1826 and the river, it made the area around the Bancroft a busy place for moving goods, and the report notes that buildings in this part of town were tied to the tramway, the canal and the river. Cox’s timber yard, by the bridge, is described as one of the reminders of that working past.
For owners of buildings near the water today, those origins explain why some are robust, plain, practical structures rather than polite houses, and why their walls may include a mix of brick types and repairs from different periods.
Colour in a historic town
Even outside the conservation area, Stratford is a town where many people care about how streets look. A few practical thoughts on colour:
- Soft, muted shades usually sit better beside old brick and timber than bright whites or strong colours.
- Look at the roof, windows and neighbouring houses at the same time as the render sample.
- A colour that looks pale on a card often looks stronger on a whole house in daylight.
- On a semi-detached house, a colour far removed from the attached house next door can look odd, so a chat over the fence first is worthwhile.
Inside a conservation area, the council may have views on colour as part of a planning application, so it’s worth discussing it with them early.
Listed buildings: how consent works
Stratford has a large number of listed buildings. Any work that affects the character of a listed building, inside or out, needs listed building consent from the district council. That includes repairs that change materials, such as replacing lime render with cement render. Carrying out work without consent is a criminal offence, so it’s not something to take risks with.
The usual route is to discuss the proposal with the council’s conservation team, prepare an application with drawings and a description of materials, and wait for a decision before starting. For historic lime work, a specialist contractor is normally the right choice, and we’ll say so if your building needs one.
Neighbours, party walls and shared access
Rendering a terrace or semi often involves the neighbours in some way. Scaffold may need to stand on their land, or overhang it. Render applied to a wall that sits right on a boundary may need their agreement. If the work involves cutting into a party wall, the Party Wall Act may apply. In most cases a friendly conversation before work starts is all that’s needed, but it’s worth having that conversation before the scaffold arrives.
Stratford’s newer estates
Most rendering we do in the town isn’t on historic buildings at all, but on houses built from the mid-20th century onward on the edges of the town and in the villages. Many have a panel of render or tile hanging between the ground and first floor windows, or a rendered front and brick sides. When those panels crack or fade, owners often take the chance to re-render the whole house in a single coloured finish. On cavity-walled houses in good condition, that’s usually a straightforward job, and it changes the look of a house more than almost any other single piece of work.
K-Rend in Stratford-upon-Avon: rendering across the town and villages
Stratford-upon-Avon has timber-framed and Georgian buildings in the centre, Victorian streets round the old town and large post-war and modern estates on the edges. K-Rend monocouche and silicone render suits a lot of the newer homes, while the historic core needs a lighter touch. RCR Connections Ltd is Birmingham based, covering the whole of the Midlands, and Stratford is a straight run down the A3400 from us. These are the parts of the area we work in most, the houses you find there and the K-Rend jobs they usually need.
- The old town and the conservation area. Listed timber-framed buildings, Georgian fronts and Victorian shops. Here hard cement render and monocouche are usually the wrong choice, and lime or a breathable system is what the wall needs. We check listed building consent and conservation area rules with you before any work is booked.
- Shottery and the Alcester Road. Old cottages near the village centre, then inter-war and post-war semis and bungalows along the main roads. On the cottages we keep to breathable finishes; on the semis, swapping tired dash for K-Rend monocouche is the common job. West towards Studley, our page on rendering in Redditch covers that side.
- Bishopton, Clopton and the north side. 1960s to 1990s estates and newer homes, many with render panels, cracked render at window corners or green staining on shady walls. Silicone render cleans up these fronts well, and K-Rend suits gables and side walls.
- Tiddington and Alveston. Larger detached homes and bungalows on the east side of the river, with some older village houses. Owners often want a smart through-coloured finish, and K-Rend with a contrast colour on bays and porches is a popular choice. Further east, our page on rendering in Leamington Spa covers the Leamington side.
- Bridgetown and the Banbury Road side. Post-war homes and newer estates over the river, with extensions and garage conversions that need rendering to match the house. We render new blockwork in K-Rend or silicone so it sits well with the rest of the front.
- Wilmcote, Clifford Chambers and the villages. Stone and brick cottages, farm buildings and modern infill. Old stone walls need a breathable finish, if they need render at all. On newer homes and outbuildings, K-Rend is the usual choice. For homes towards the county town, see rendering in Warwick.
Wherever you are in Stratford-upon-Avon, the first step is the same: WhatsApp me on 07453 614095 or message the page with a photo of each side of the house and your road or postcode. We work Monday to Friday 7am to 5pm and Saturday 7am to 1pm, and between us we have 62 years of combined experience.

Matching the render to the building
The best way to think about render in Stratford is by the age and construction of the house, rather than by product name.
Timber-framed buildings
Timber-framed buildings need materials that let moisture move. Traditional infill panels and coatings were lime-based. A hard cement render over timber frame can trap water against the timbers and cause decay. We don’t apply modern renders to historic timber frames. If you own one, the council’s conservation team and a lime specialist are the right people to speak to first.
Georgian and Regency brick
Many of these buildings are listed or sit in the conservation area, and most should be left as brick. Where a Georgian house already has a stucco or rendered front, repairs should usually match the existing material, which is often lime-based. Again, that’s specialist work and needs the right consents.
Victorian and Edwardian villas
Solid brick villas on the northern and eastern roads were designed to show their brickwork, though some have rendered gables or bays. Repairs to existing render panels are common; full re-rendering of a brick villa is rarely appropriate.
Inter-war houses
Semis and detached houses from the 1920s and 1930s often have roughcast or pebbledash on the upper floor, or across the whole house. When that finish has failed, re-rendering is often the right answer, and a coloured system can be a good fit.
Post-war and modern houses
These are usually cavity-walled, often with block inner leaves and sometimes render already. They’re the most straightforward to re-render, and the ones where K-Rend monocouche and other one-coat systems are most often used.
Coloured through-render in more detail
K-Rend monocouche is made by Kilwaughter Minerals, and its colour runs right through the material, so it doesn’t need painting. The top coats contain silicone, which the manufacturer says makes them water-repellent while still letting the wall breathe, and more resistant to algae. There are thicker scraped-texture products for brick and block, a thin coat range for boards, and a true one-coat monocouche product, K Mono, for machine application.
For a full explanation, our K-Rend monocouche rendering page goes into the products, thicknesses and the scraping stage. The comparison of render types sets K-Rend monocouche alongside silicone and sand and cement.
Thin silicone finishes
Thin silicone renders are typically applied over a base coat or insulation boards. They give a fine, crisp texture and are also through-coloured. They’re often used where a smoother modern look is wanted, or as part of an insulated system.
Sand and cement
A traditional sand and cement render, finished with masonry paint, still suits mending houses that were done in it originally, and for some plinths and garden walls. It needs repainting over time.
Planning in Stratford: the essentials
The council says there are 75 conservation areas across the district. The Stratford-upon-Avon conservation area was first designated by Warwickshire County Council in 1969, and the district council adopted a revised boundary and report on 20 July 1992. Shottery, on the western edge of the town, is a separate conservation area.
The council has said it’s working with consultants, Place Services, to review eight conservation areas, including Stratford-upon-Avon, with formal consultation planned for 2026. The boundaries and guidance may change as a result, so check the council’s website for the current position.
What needs permission
- Rendering or cladding the outside of a house in a conservation area needs planning permission.
- Listed buildings need listed building consent before their outside appearance is altered.
- Outside conservation areas, new materials on a house should look similar to the existing ones, so rendering an unrendered brick house can still need permission.
- Building Regulations can apply if a large proportion of a wall is re-rendered, as that can count as work on a thermal element.
If in doubt, ask the district council before you commit. It’s much easier than putting things right afterwards.
Common faults on Stratford houses
The faults we see most often in the town are similar to anywhere in the region, but a few are worth spelling out.
- Cracked roughcast on inter-war houses, often with hollow areas behind it.
- Pebbledash that has lost its stones or comes away in sheets.
- Render taken below the damp-proof course, bridging it and causing damp inside.
- Painted render that’s peeling, because the paint has trapped moisture.
- Stains under sills that have no drip, or under overflowing gutters.
- Green growth on north-facing or shaded walls, especially close to trees and the river.
Our post on signs render needs repairing before winter describes these in more detail.
Homes near the river
Houses close to the Avon tend to sit in damper, shadier conditions. That doesn’t stop them being rendered, but it makes good detailing even more important: a proper drip at the base, clear gutters, and a finish that sheds water and resists algae. On the shaded side of a house near water, a silicone-containing finish has a practical advantage.
Working out what your walls are made of
Before choosing any render, it helps to know whether your house has solid walls or cavity walls. There are a few simple clues you can check yourself.
- Wall thickness: measure the wall at a window or door reveal. Solid brick walls in older houses are often around 225mm, about the length of one brick, plus plaster. Cavity walls are usually thicker, as they have two leaves with a gap between.
- Brick pattern: on an unrendered wall, if some bricks are laid end-on, showing their short faces, the wall is probably solid, because those bricks tie the two halves together. A wall showing only long faces is more likely to be cavity.
- Age of the house: most houses built before the 1920s are solid-walled; cavity walls became common over the following decades.
- Air bricks and weep holes: small vents near the base, or gaps in mortar above openings, are clues to how the wall was designed to handle moisture.
None of these is foolproof, especially on a house that has been altered, but they’re a good starting point. We’ll confirm at the survey.
Inter-war roughcast: repair or replace?
Many 1920s and 1930s houses on the outskirts of Stratford were finished in roughcast or pebbledash, sometimes on the upper floor only, sometimes all over. After nearly a century, a lot of it is cracked or hollow.
When a repair makes sense
If the hollow areas are small and the rest is well bonded, cutting out and patching can work. The challenge is matching the texture: old roughcast was thrown on by hand, and each house has its own look. A painted finish can help a repair blend in, but it means the whole elevation will need painting.
When it’s time to start again
If tapping finds hollow sound over large areas, or the finish is coming away in sheets, patching becomes a false economy. Stripping back to the brick and applying a new system gives a sound, uniform result. It’s also the point at which you can choose a coloured through-render and stop painting altogether.
Pebbledash and what to do with it
Pebbledash was a popular finish for decades, and it’s tough when it’s well bonded. When it fails, though, it tends to fail in sheets, and the stones make it difficult to render over directly. The usual options are:
- Strip it completely and render the brick or block behind. This is the most reliable approach.
- Remove loose areas and apply a suitable base coat over the rest, where the remaining dash is firmly bonded and the system manufacturer allows it.
- Leave it and paint it, which can freshen the look for a while but doesn’t deal with any hollow areas.
We’ll tell you honestly which we think suits your house, based on what we find when we tap it.
Preparation, step by step
Most of the time on a rendering job goes into preparation. On a typical Stratford house it looks something like this:
- Sheeting and taping windows, doors, paths, planting and anything close to the work.
- Stripping old render, dash or paint where it isn’t sound.
- Raking out and repointing weak mortar where the render will rely on it.
- Repairing damaged brick or block.
- Fixing corner beads, stop beads around openings and a drip bead at the base, set above the damp-proof course.
- Embedding mesh across junctions between different materials and anywhere the system needs it.
- Controlling suction, either by dampening or with a base coat, so the finish dries evenly.
Skipping any of these can cause problems that only show months later, which is why we give them the time they need.
Extensions and matching the main house
A common job is rendering a new extension to match a house that’s already rendered, or rendering both together so they look the same. A few things help:
- If the main house is painted sand and cement, the extension can be rendered the same way and both painted together.
- If you want a coloured through-render, it usually looks best to do the whole house, as an old painted finish and a new through-coloured one rarely sit happily side by side.
- The junction between old and new should have a movement joint or bead, as the two parts may move slightly differently.
Insulation beneath a new render
If you’re re-rendering a whole house, it’s worth asking whether to add insulation at the same time. Insulated systems use boards fixed to the wall, followed by a base coat with mesh and a thin coloured finish. They can make a real difference to comfort in a cold, solid-walled house, but they also thicken the wall, which affects window sills, roof eaves, downpipes and the relationship with neighbouring houses. In a conservation area they’re likely to need permission, and on historic buildings they may not be suitable at all.
The details that keep water out
Water is what damages render, and it gets in at the details far more often than through the middle of a wall.
- Sills should project and have a drip, so water falls clear rather than running down the face.
- Copings on garden walls and parapets should overhang on both sides.
- Bay windows need their roofs and lead flashings checked before rendering beneath.
- Gables take the worst wind-driven rain, so render there should be well bonded and well detailed at the verge.
- Chimneys often need their flaunching and flashings repaired before any render is worth applying.
- Gutters and downpipes should be clear and properly jointed.
Rendering won’t cure damp on its own
Some owners hope that rendering a damp wall will stop the damp. Sometimes it helps, if the problem was rain soaking through a porous wall. But if the damp is caused by a bridged damp-proof course, high ground levels, a leaking gutter or condensation indoors, render won’t solve it and can make it worse by trapping moisture. We’ll look for the cause first and tell you what we think it is.
Living with a finished render
Through-coloured renders don’t need repainting, but a little care keeps them looking good:
- Clear gutters each autumn, especially near trees.
- Keep soil, bark and gravel below the bead at the base.
- If shaded walls go green, treat them with a suitable biocide and gentle brushing; a jet washer can scar the surface.
- Check the sealant around windows and doors from time to time.
- Report any cracks early; small repairs are easier than large ones.
Repairing an existing coloured render
If your house already has a through-coloured render with a damaged area, a repair is possible, but matching it exactly is hard. Weathering changes the shade over the years, and batches can vary slightly. The neatest results come from ending the repair where the eye expects a change anyway, like a window edge, a bead or the corner. Where damage is scattered over one side, redoing that side in full tends to read better than a patchwork.
Porches and canopies
Porches are small, but they’re often where render looks worst, because water from the canopy or a short roof drips onto the same spot day after day. Good flashing where the porch roof meets the house, and a drip at the base of the render, make a real difference.
Garden walls and outbuildings
Freestanding walls, garages and outbuildings take more punishment than the house itself, because they’re exposed on both faces and across the top. Before rendering one, we check the coping, since a wall that’s wet from above will push the render off from behind. A wall leaning or cracked from tree roots needs rebuilding rather than rendering. Garages and sheds built in single-skin block are good candidates for a simple render, provided the base is detailed so water doesn’t sit against it.
Tile hanging, cladding and render together
Many houses in and around the town mix materials: tile hanging on a bay, timber boarding on a gable, render on the main walls, brick on the ground floor. Where render meets another material, the junction needs a clean stop and, where water runs down from above, a drip or flashing so it’s shed clear. It’s common to keep the tile hanging or timber and re-render only the plain areas, which preserves the house’s look while fixing the parts that have failed.
Bungalows
Bungalows are often the simplest houses to render, because every wall can be reached from a low scaffold or even platforms, and there are fewer awkward details. That doesn’t make preparation any less important. Low walls are close to the ground, so the base detail and the relationship with paths and borders matter even more. Splash-back from rain hitting a hard path can stain the bottom of a render, and a gravel strip along the base helps.
Guest houses and holiday lets
Stratford receives a great many visitors, and plenty of houses are run as guest houses or holiday lets. For those owners, timing is the main concern. Rendering is best planned outside the busiest weeks, and sheeted scaffold can be arranged so entrances stay usable. A through-coloured finish also suits businesses that don’t want to close for repainting every few years.
When the weather stops play
Even with careful planning, the weather sometimes turns. If rain arrives part way through a day, we finish at a corner or bead line rather than leaving a half-finished wall that will show a line. Fresh render is protected with sheeting, and we come back to continue when conditions allow. If frost is forecast overnight soon after application, we take steps to protect the work, or delay starting.
Questions for any rendering firm
- Which product will be used, and on what background?
- What thickness, and how many coats?
- What will be stripped, and what will be rendered over?
- Where will beads and movement joints go?
- How will the base be finished in relation to the damp-proof course?
- What happens if the weather stops work halfway through a wall?
Clear written answers make it much easier to compare quotes fairly.
How a rendering job runs
- Photos first: send pictures of each side of the house and any problem areas.
- Survey: we visit, tap the walls for hollow areas, look at the background, and check the base and openings.
- Written quote: it sets out what’s being stripped, what’s being repaired, the system, thickness and finish.
- Scaffold and protection: the house, windows, paths and planting are covered.
- Preparation: stripping, repairs, beads, mesh, and any base coat.
- Render: applied elevation by elevation, so each wall is finished in one go.
- Finish: scraping or texturing at the right stage, then brushing down.
- Handover: we remove the protection, clear up, and walk round with you.
Free, no-obligation quote in Stratford-upon-Avon: WhatsApp me on 07453 614095 with a few photos, or send us a message.
Garrick, the theatre and a town built for visitors
The report links much of Stratford’s later development to its role as a destination. The Garrick Jubilee of 1769 is often seen as the start of the town’s tourist trade, and the Memorial Theatre of 1879 strengthened it. Many central buildings were adapted as inns, shops and lodgings, with fronts remodelled to suit. For anyone working on those buildings today, that layered history is another reason to look carefully before choosing a finish.
Access in the centre
In the historic centre, access is often the biggest practical question. Scaffold on a pavement needs a licence from the highway authority, which the scaffold firm usually arranges. Shared alleys and archways need agreement from everyone who uses them, and from neighbours where scaffold has to stand on their land. Deliveries of materials may need to be timed around loading restrictions. We’ll talk this through at the survey so there are no surprises.
Villages around the town
We render houses across the district and nearby, including Shottery, Tiddington, Alveston, Clifford Chambers, Wilmcote and Welford-on-Avon. Many villages have their own conservation areas, so the same advice about checking first applies.
Shottery and the western edge
Shottery has its own conservation area, separate from the town’s. The report mentions it among the villages, with Tiddington and Bishopton, that were once isolated hamlets before the town grew out to meet them. If your house is in Shottery, check the boundary of that conservation area as well as the town’s before planning changes to the outside.
Across the bridge
On the far side of Clopton Bridge, Bridgetown and the Tiddington Road have a mix of older properties and 20th-century houses. The Tiddington approach is one of those the report speaks well of, so changes to the fronts of houses along it are worth considering carefully, even where they don’t need permission.
If you’re further north or west, these pages may be more useful:
- Plastering in Alcester
- Rendering in Redditch
- Plastering in Warwick
- Plastering in Leamington Spa
- Rendering in Solihull
The areas we cover page has the full list.
Working through the seasons
Render isn’t applied when it’s freezing, pouring or baking hot, and fresh render needs protecting from frost overnight while it cures. Spring to early autumn is the most reliable season, though we can work into late autumn with care and with an eye on the forecast. Scaffold sheeting helps keep light rain off and shades the wall from sun.
Inside the house
Rendering is outside work, but problems outside often show indoors. Where failed render has been letting in water, there may be damaged plaster inside. Once the outside is weathertight, we can replaster those areas. Our posts on how long plaster takes to dry before painting and plastering over Artex answer the most common questions about the indoor side.
You can see examples on our projects page, and our wider list of trades is on plastering and rendering services. To write to us, use the contact page.
Our services
More services: Rendering with sand and cement · Rendering new extensions.
Rendering in Stratford-upon-Avon: common questions
Do you cover Stratford-upon-Avon and the surrounding area?
Yes. RCR Connections Ltd is Birmingham based, covering the whole of the Midlands, and works across Stratford-upon-Avon and Coventry and Warwickshire. We also cover Coventry, Solihull and Birmingham. For the full list, see areas we cover.
How do I get a rendering quote in Stratford-upon-Avon?
WhatsApp me on 07453 614095 or message the page with photos of each side of the house, and tell us what finish you have in mind. We will come back with a free, no-obligation quote, or arrange a visit to look at the walls first.
Do you do K-Rend in Stratford-upon-Avon?
Yes. K-Rend monocouche and silicone render is our main rendering system, and we fit it on houses, extensions, garage conversions and garden walls right across Stratford-upon-Avon, from Shottery and Bishopton to Tiddington, Bridgetown and the villages round the town. WhatsApp me on 07453 614095 or message the page with photos for a free quote.
Which render is right for my house?
It depends on the wall, the house and the look you want. We work with sand and cement, silicone, through-coloured monocouche (such as K-Rend monocouche) and insulated render, and we will recommend one after seeing the wall. Our guide K-Rend monocouche vs silicone vs sand and cement render explains the differences.
Can you render a listed building in Stratford-upon-Avon?
Sometimes, but only with listed building consent from Stratford-on-Avon District Council, and usually in lime or another breathable finish rather than K-Rend. Many old buildings in the centre are timber-framed or brick that should stay as it is, so we look at the building and talk you through what is allowed before any work is booked.
Can you match render on a new extension in Bishopton or Clopton?
Yes. We can match the colour and texture of the house as closely as the system allows, or render the whole front so the house and the extension read as one. We go through samples with you on site before anything is ordered.
What hours do you work?
Monday to Friday 7am to 5pm and Saturday 7am to 1pm.
