Wellesbourne is one of the biggest villages in south Warwickshire, strung along the A429 between Warwick and the Fosse Way country, a few minutes from Stratford-upon-Avon. It grew from two separate settlements either side of the River Dene, and today it mixes thatched cottages, a Georgian hall and old farm buildings with large estates built from the 1960s onwards, including the Dovehouse streets on part of the wartime airfield. RCR Connections Ltd is Birmingham based, covering the whole of the Midlands, and Wellesbourne sits comfortably inside the area we plaster and render.

Below you will find a detailed look at Wellesbourne’s houses and what tends to go wrong with their walls and ceilings, followed by our approach to the plastering jobs people here are most likely to need. It is written to help you plan, whether you own a cottage near Chestnut Square, a 1970s semi off Warwick Road or a brand-new house on one of the recent estates.

Free, no-obligation quote in Wellesbourne: WhatsApp me on 07453 614095 with a few photos, or send us a message.

Two villages and one river

Hastings and Mountford

For most of its history there were two Wellesbournes. Wellesbourne Hastings lay north of the Dene and Wellesbourne Mountford to the south, each with its own manor and parish. The two were joined as a single parish in 1947, and the civil parish was renamed Wellesbourne and Walton in 2014. That double origin is why the village still has two centres: Chestnut Square, where old shopfronts can still be made out in what are now houses, and the Precinct, where most of the shops are today.

An Anglo-Saxon meeting place

The name was first written down in 862 as Wallesburam, and it appears in Domesday as Waleborne. Wellesbourne is recorded as a place where Mercian kings met their councillors in the ninth century, with gatherings noted in 840, 862 and 872. In May 1140 the village was struck by a tornado, one of the earliest recorded in Britain, which damaged buildings and killed a woman.

Joseph Arch and the Stag’s Head

On 7 February 1872 Joseph Arch, a farm worker and Methodist preacher from nearby Barford, spoke to a gathering of labourers under the chestnut tree in front of the Stag’s Head. The meeting led to the National Agricultural Labourers’ Union, and a plaque in the bus shelter opposite the pub marks the event. The Stag’s Head itself is a seventeenth-century thatched building that became a pub in the nineteenth century. It was badly damaged by fire in 2021 and reopened after restoration.

Wellesbourne Hall and the old vicarage

Wellesbourne Hall dates from about 1700 and is listed at Grade II*. The old vicarage is dated to 1698. Both are good examples of the brick houses that wealthier families built around the turn of the eighteenth century, with tall rooms, sash windows and plastered interiors that have been altered many times since.

The airfield and the post-war boom

During the Second World War RAF Wellesbourne Mountford was built immediately south of the village. After the war it became a civilian airfield, now home to a flying school, an aviation museum with a Vulcan bomber and the Saturday market. From the 1960s new estates began to spread out from the old core, and in the 1980s around eight hundred homes were built on the Dovehouse estate, on land that had been part of the airfield, with streets named after aircraft. The village has kept growing since, with several large developments added in the last fifteen years.

Reading a Wellesbourne house

Thatch, timber and lias

The oldest cottages around Chestnut Square, Church Walk and the lanes by the Dene are a mix of timber framing, brick and local lias limestone, several of them thatched. Inside, walls are typically lime plaster on stone, brick or wattle infill, and ceilings are lime on wooden laths, sometimes with exposed beams between. These houses are built to breathe and to move, and repairs have to respect that.

Brick of the eighteenth and nineteenth centuries

Georgian and Victorian brick houses, farmhouses and terraces fill in much of the historic centre and the older parts of Warwick Road and Bridge Street. Walls are usually solid brick, plastered with lime-based undercoats and a fine lime or early gypsum finish. Ceilings are lath and plaster, with cornices in the better rooms.

Inter-war and early post-war council and private houses

Some houses date from the decades between 1920 and 1960, including council-built semis with good-sized gardens. These usually have cavity walls, sand and cement or early gypsum undercoats, and ceilings in an early form of plasterboard or lath. Their plaster is generally sound but has often been cut about for rewiring, central heating and new kitchens.

The 1960s and 1970s estates

The first big expansion added hundreds of semis, detached houses and bungalows. Most are brick and block cavity construction with wet plaster on the walls and plasterboard ceilings, many finished with a textured coating. These are some of the most frequently extended houses in the village.

Dovehouse and the 1980s

The Dovehouse houses were built quickly and in large numbers, mostly with timber-frame or block inner leaves dry-lined in plasterboard. Typical issues are cracked board joints, nail or screw pops, damaged corners and walls that flex or sound hollow.

Recent estates

Newer houses on the edges of the village are almost all dry-lined, with a thin skim or taped-and-jointed finish. Owners usually ask us to repair snagging, form new openings, add feature walls or plaster an extension or loft conversion.

Why the age of the wall matters

Soft walls and hard plaster

Solid walls of stone, cob-like infill or old brick were never designed to keep water out entirely. They take in some moisture in wet weather and let it out again when it dries. Lime plaster helps that process. Modern gypsum and cement plasters are much harder and less permeable, and on a solid wall they can hold moisture in, which leads to damp patches, salt staining and crumbling. In Wellesbourne’s oldest houses, the safest starting point is to work out what is already on the wall and why.

Cavity walls and dry-lining

In houses built from the 1930s onwards, the inner wall is protected by the cavity, so modern gypsum products work well. The decision there is more about the background: wet plaster on block, or boards on dabs or battens, and the finish that best suits the room.

Where they meet

Extensions, porches and conversions often join a solid-walled cottage to a modern block or timber addition. The junction is a weak point. Different materials move in different ways, so a crack will appear along the line unless it is planned for. We use scrim tape, beads and movement detailing at these points.

Thatched cottages: special care inside

Fire safety and wiring

Thatched houses need particular care with anything that creates heat, including the tools used by other trades. On our side, plastering itself involves no flame or hot work, but we are careful with lighting and extension leads in roof spaces and keep everything tidy.

Ceilings under thatch

Bedroom ceilings in thatched cottages are often low, uneven and following the line of the roof timbers. Repairs are usually best done in lime or with boards fixed carefully between beams, keeping the character of the room rather than flattening everything.

Dust and debris from the roof

Old thatch sheds dust and fragments into the roof space, and when a ceiling is opened up it can come through. We seal off the room carefully and clear up thoroughly.

The jobs we are asked to quote for

Single rooms

Many enquiries are for one room: a bedroom before redecoration, a lounge after the old wallpaper has come off, or a kitchen after new units have been fitted. A typical room is a day or two of work, depending on whether we are skimming over sound plaster or replacing it.

Whole houses

When a house changes hands, new owners often want every room put right at once, sometimes alongside a rewire and new heating. In that case we plan the work in order, ceilings before walls and upstairs before down, working with the electrician and plumber so their work is finished before we plaster.

Ceilings

Cracked or sagging ceilings are one of the commonest requests. Depending on the house that might mean overboarding, replacing old lath, or simply skimming over a sound but textured surface. On 1960s and 1970s textured ceilings, we always ask whether the coating has been tested for asbestos before we start.

Extensions

Single-storey kitchen and family-room extensions are very popular in Wellesbourne. We plaster block walls, board ceilings and skylights, form clean reveals around wide glazing and blend the new walls into the old house.

Loft conversions

Bungalows and larger houses from the 1960s and 1970s often have the roof space to add one or two rooms. We board and skim sloping ceilings, dormers and knee walls to the specification approved by building control, and finish the new stairwell.

Garage conversions

A converted garage is a quick way to add a study, playroom or extra bedroom. Garage walls here are nearly always a single leaf, so an insulated lining has to go on before any plaster does. We work to the system set out in your plans.

Repairs after leaks

Burst pipes, leaking showers and roof leaks leave stained and softened plaster. After the leak has been fixed and the area has dried, we cut back damaged material, replace boards where needed and plaster so the repair blends in. If an insurer is involved, we provide a clear written description of the work.

A walk through the village

Chestnut Square and Church Walk

The old heart of Wellesbourne Hastings gathers around Chestnut Square, with St Peter’s church close by. This is where the oldest cottages, the former shops and the Stag’s Head stand together. Walls here may be lias rubble, timber frame with brick infill or early brick, often rendered or limewashed. Inside, expect thick walls, uneven ceilings, deep window reveals and the remains of old fireplaces. The plastering in these houses tends to be piecemeal: a ceiling repair here, a wall made good after a new staircase there, always matched to what is already present.

Bridge Street and the river

Bridge Street crosses the Dene and links the two halves of the old village. Houses along it range from small cottages to substantial Victorian villas. The river’s presence means some properties have had damp problems over the years, and many have been re-plastered at low level in cement-based materials, not always successfully.

Warwick Road

Warwick Road runs north towards Charlecote and the A429. It has a long mix of buildings, from older houses near the centre to inter-war and post-war homes further out. The King’s Head is here too. Many of the houses along the road have been extended to the rear, and those extensions are where we are most often asked to work.

Kineton Road, Ettington Road and Loxley Road

These roads lead out to the surrounding villages and carry many of the 1960s and 1970s houses and bungalows, with estates branching off them. Ceilings with a textured finish, walls with tired 1970s plaster and rooms reshaped over the years are typical.

The Dovehouse streets

Built on airfield land in the 1980s, the Dovehouse estate has its own character: closely planned roads, cul-de-sacs and a clear house style, with street names taken from the aircraft that once flew from the base. The houses are now around forty years old, and many are on their second or third owners, who are opening up kitchens, converting garages and adding conservatories.

The newest developments

Several large estates have been built on the edges of the village since around 2010, adding well over a thousand residents. Owners of new homes usually come to us after the builder’s snagging period, wanting to change layouts, add features or fix settlement cracks.

Choosing boards and finishes

Standard plasterboard

The workhorse for ceilings, partitions and dry-lining. Fixed with screws to timber or metal, or bonded with adhesive dabs to masonry, then taped and skimmed.

Moisture-resistant board

Used in bathrooms, en-suites and utility rooms where steam and splashes are expected, though not as a direct tile backer in showers, where a dedicated cement or foam board is better.

Fire-rated board

Specified around steel beams, in garage ceilings below bedrooms, in loft stairwells and between flats. Building control will tell your designer where it is needed, and we fit it to their specification.

Acoustic board

Denser board that reduces sound between rooms. Useful for bedrooms next to a home office, children’s rooms and media rooms. It works best combined with insulation and careful sealing at the edges.

Insulated board

Plasterboard bonded to a layer of insulation, used to improve cold walls, garage conversions and some older houses. On solid walls it has to be used carefully, because it changes how moisture behaves in the wall; it is not always the right choice.

Finishes

On board, a two-coat skim gives a smooth, hard surface. On masonry, we use a backing coat (such as a bonding or hardwall plaster on modern backgrounds, or lime on old walls) followed by a finish coat. For listed and historic buildings, a lime finish may be the only suitable option.

Buying an older house in Wellesbourne

What to look for

When viewing an older cottage or Victorian house, look for bulging or cracked ceilings, stained or flaking plaster at the base of walls, hollow-sounding areas when you tap the walls, and fresh paint on just one patch, which can hide a problem. None of these is unusual, but they help you budget.

Surveys

A building survey will flag damp readings, but meter readings on old solid walls can mislead, especially where salts are present. If damp is mentioned, it is worth understanding the cause before assuming walls need to be stripped and treated.

Planning the work

If you are planning to rewire, re-plumb or replace windows, do it before re-plastering. It is quicker and tidier to plaster once, after the messy work is done, than to patch again afterwards.

Landlords and lettings

Between tenancies

Rented homes often need patching and skimming between tenants: picture hook holes, damaged corners, stained ceilings and areas of blown plaster. We can work quickly to a fixed schedule so the property is ready to let again.

Condensation and mould

Mould in rented homes is often due to condensation. Improving extraction and ventilation should come first. Once that is done, we can replace damaged plaster and leave a surface ready for anti-mould paint if wanted.

Paperwork

Agents and landlords usually want a clear written quote and description of work. We supply this as standard.

Room by room notes

Living rooms

Living rooms show cracks most clearly because they are lit from several angles. Long walls and ceilings need care to keep them flat. Where a chimney breast has been removed, the area above and below needs checking for proper support before we plaster.

Kitchens

New kitchens often involve moving pipes and cables and fitting heavy wall units. Our visit fits between the first-fix wiring and plumbing and the day the cabinets turn up, which gives the fitter flat, true walls to hang cabinets on.

Bathrooms

Showers and baths need the right board or background behind tiles, while walls away from the water simply get a skim and, later, a paint made for steamy rooms.

Bedrooms

Bedrooms are often the simplest rooms in a house, but older ceilings above them can be fragile. We look closely at lath ceilings before deciding whether to repair, overboard or replace.

Halls and landings

These are the hardest-working spaces. Tall walls beside stairs, plenty of corners and heavy use mean that damage and cracking are common. We protect stairs and banisters carefully and use beads on corners for durability.

Damp in a low-lying village

The Dene valley

Wellesbourne sits low in the valley of the Dene, a tributary of the Avon. Houses close to the river and on the lowest ground can be affected by high water tables and, in very wet years, flooding. Plaster that has been soaked takes time to dry and may need replacing.

After flooding

If a property has been flooded, walls must be allowed to dry thoroughly before they are re-plastered, which can take weeks. In some cases a flood-resilient approach makes sense, using materials that recover better if the worst happens again. We are happy to talk this through with you and your insurer.

Everyday damp

Most damp we see has a simpler cause: blocked gutters, broken downpipes, cracked render, missing pointing, a high flower bed against the wall, or condensation from cooking and drying clothes indoors. Fixing the source first is always the priority, then the plaster can be repaired.

Rendering in Wellesbourne

What is on the walls now

Wellesbourne has a mix of exposed brick, painted render on older cottages, roughcast and pebble-dash on post-war houses, and through-coloured render on some new builds. Over time older render cracks, blows and stains, and many owners want to freshen the look of a house when they extend it.

The systems we use

We apply traditional sand and cement, lime renders on older buildings, and modern through-coloured systems including K-Rend monocouche and silicone finishes. Silicone top coats are water repellent and help keep the surface clean, which suits houses in open settings with plenty of weather. For historic solid walls we will recommend a breathable lime-based approach. More detail is on our rendering in Stratford-upon-Avon page and our K-Rend monocouche guide.

Planning considerations

Altering the outside appearance of a listed house, or of one inside the protected core, can require consent. Stratford-on-Avon District Council handles planning for Wellesbourne, and it is worth checking with them before committing to a new render colour or finish on an older house.

Planning and permissions

Stratford-on-Avon District Council

The district council deals with planning applications and listed building consent, and Warwickshire County Council with highways and some other matters. Wellesbourne and Walton Parish Council comments on applications and has a neighbourhood plan setting out local priorities.

Conservation area and listed buildings

The older core of the village around the church, Chestnut Square and the river has protected status as a conservation area, and there are a good number of listed buildings, from cottages to Wellesbourne Hall. Inside a listed building, works that affect its character can need consent, including the removal of historic plaster.

Building regulations

Extensions, loft and garage conversions and some internal alterations are controlled by building regulations. We work to your designer’s specification for insulation, fire boards and moisture-resistant boards, and leave each stage ready to be inspected.

How we organise a job

First contact

Send us a few photos of the rooms, approximate measurements and a line or two about the result you are after. If the job is straightforward we can give a guide figure from the photos; for larger or older properties we will arrange to come and look.

The quote

Our quote explains what we will do, what we will not, what you need to arrange (such as electricians or removing furniture) and roughly how long it will take. If we see something that needs another trade, such as a damp problem or a roof leak, we will tell you.

Booking

Once you are happy, we agree a start date. On bigger projects we fit in with the builder’s programme.

On site

We protect floors, furniture and stairs, set up our boards and mixing area, and get on with the work. We keep the site tidy as we go and clear up properly at the end of each day.

Finishing

At the end of the job we go round with you, point out anything to keep an eye on while the walls dry out, and talk you through mist coats and decorating.

Getting a room ready

Furniture and fittings

Move as much as you can out of the room. What is left will be sheeted. Take down curtains, blinds, shelves, mirrors and pictures, and lift any loose rugs.

Other trades

Have sockets and switches loosened or moved by an electrician beforehand, and any radiators taken off if the wall behind them is being plastered. New cables and pipes should already be in.

Wallpaper and paint

If old paper is still up, strip it or let us know so we can include it. Gloss paint, varnish and flaking emulsion need special preparation, so mention them when you ask for a quote.

Access

Let us know about parking, any narrow access, and where we can mix and wash tools. On older lanes around the centre, parking can be limited at busy times.

How long until you can paint

Drying

Fresh plaster is dark when it goes on and lightens as it dries. A skim over boards can be dry in a few days in good conditions; thicker coats on solid walls can take a week or more, especially in winter.

Good drying habits

Keep the room ventilated and gently heated. Leave doors open where possible. Avoid strong direct heat, which can make the surface crack.

The first coat of paint

Go on first with a diluted trade matt, the mist coat, which sinks into the surface rather than sitting on it. Follow with full coats once it has dried. Avoid vinyl silk or wipeable paints until the mist coat is on.

Seasonal notes for south Warwickshire

A dry corner of England

Weather records for Wellesbourne show a place that is drier than most of the country, with sharp frosts on winter nights and some properly warm summer afternoons. That matters for plastering: in a cold snap, unheated rooms and outbuildings can drop close to freezing overnight, and plaster must not freeze while it is setting.

Summer heat

In hot weather plaster can set too fast, especially in south-facing rooms and lofts. We control the conditions as best we can, keeping windows shaded and avoiding the hottest part of the day for the most sensitive work.

Rendering season

External rendering is best done in mild, settled weather, without frost, heavy rain or strong sun on the wall. We plan render jobs around the forecast.

Common faults and how we deal with them

Cracks along board joints

Usually caused by movement or poor taping. We cut out, re-tape with scrim and skim.

Hollow-sounding walls

Plasterboard on dabs that were too few, or old plaster that has lost its key. We check how widespread it is; small areas can be fixed back, larger ones replaced.

Blown plaster in old houses

Patches that bulge or sound hollow on solid walls. We cut back to sound material and repair with a compatible plaster.

Stains that keep returning

Often the sign of salts or an unsolved leak. The cause needs fixing, then the plaster can be renewed with a suitable background treatment.

Damaged corners and reveals

Common in busy houses. We fit new beads and rebuild the corner, or form a crisp arris in plaster if a bead is not wanted.

Barns, farm buildings and conversions

A farming parish

Wellesbourne was an agricultural village for most of its history, and the parish still has working farms, old barns and stables. Many of these buildings have been converted into homes and offices over the last forty years, and more are being converted now.

What makes conversions different

Barns were built to keep animals and crops dry enough, not to be lived in. Walls are often thick, irregular and made of mixed materials, and there may be exposed timber frames, trusses and old openings that the design wants to show off. Plastering a converted barn involves working neatly around those features, choosing a background that will cope with old masonry, and lining walls to meet insulation rules without hiding the character.

Our part in a conversion

We usually join a conversion once the structure, roof, windows and first fix services are complete. We then board and skim new partitions and ceilings, apply backing and finish coats to masonry where it is to be plastered, and form clean edges against exposed brick, stone or oak. Where a historic building is involved, we follow the conservation officer’s requirements as set out by your architect.

Adapting a home for later life

Wider doors and level access

Many owners in Wellesbourne are adapting houses so they can stay in them longer: widening doorways, creating downstairs bedrooms and wet rooms, and fitting handrails and grab rails. Each change leaves walls and ceilings to be made good.

Strong fixing points

Grab rails and handrails need solid fixings. When we plaster a wet room or hallway that will have rails, we talk to the builder about adding timber noggins or plywood behind the board where the rails will go, so they can be fixed securely later.

Durable finishes

Walls in busy hallways and around wheelchair routes take knocks. Corner beads, impact-resistant boards and well-prepared reveals help them last.

Around the village: places that shape the area

Chedham’s Yard

Chedham’s Yard, a group of nineteenth-century blacksmith and wheelwright workshops, won the BBC’s Restoration Village competition in 2006 and has since been restored. It is a good example of the kind of modest working building, in brick with timber and lime, that is common around Wellesbourne.

The watermill

Wellesbourne’s watermill on the Dene is a reminder of how important the river was to the village economy, grinding corn for centuries.

Warwick Crop Centre

The research site outside the village began in 1949 as the National Vegetable Research Centre and is now part of the University of Warwick. It is one of several large employers that helped Wellesbourne grow.

Charlecote and the Avon

To the north-west, Charlecote Park and the Avon valley give the area its parkland character. Houses on the edge of the village look out over farmland and open country.

The villages around Wellesbourne

Walton and Loxley

Walton, joined with Wellesbourne in the parish name, is a small estate hamlet. Loxley, on higher ground to the west, has old stone and brick cottages and a historic church.

Charlecote and Hampton Lucy

Both villages have many estate cottages and listed buildings. Their solid walls and lime finishes need the same thoughtful approach as Wellesbourne’s oldest houses.

Kineton and the Edgehill villages

South-east, Kineton and the villages towards Edgehill are built largely of local lias and the brown Hornton stone of the escarpment. We cover them too; see our plastering in Kineton page.

Barford, Moreton Morrell and Ashorne

These villages towards Warwick have a mix of older cottages and newer homes, and many owners commute from them to Warwick, Leamington and beyond.

Experience you can rely on

The team has 62 years of combined experience. For Wellesbourne, where a single street can hold a thatched cottage, a Georgian farmhouse and a 1980s estate house, that breadth matters. We can tell the difference between a hairline crack that a decorator will fill and one that signals movement, between old plaster worth saving and plaster that needs to come off, and between a job we should do and one that needs a lime specialist. RCR Connections Ltd keeps you informed, leaves a clean site and gives straight advice.

Wellesbourne homes we plaster

Wellesbourne is a large village with old cottages, post-war estates and newer homes, plus villages around it. Here’s where we work most, the homes you’ll find there and the plastering jobs that come up.

Whatever the house, RCR Connections Ltd puts 62 years of combined experience into it. We’re Birmingham based, covering the whole of the Midlands, and we work Monday to Friday 7am to 5pm and Saturday 7am to 1pm. WhatsApp me on 07453 614095 or message the page with photos of the room and your road or postcode in Wellesbourne.

Outside, we also fit K-Rend monocouche and silicone render for homes around Wellesbourne, see rendering in Stratford-upon-Avon. Down the B4086, we’re also the plasterer in Kineton.

What our customers say

Was amazed by the punctuality from them as far as tradesmen go and the experience was stress-free with a great finish to my maisonette.

James Tranter

We chose them for our home extension, and the transformation was amazing. Their work is top-notch, and I’d recommend them to anyone seeking both quality and luxury in construction.

Emma S

These guys were great lads, grafted hard, and was really happy with the price and the end result. Blimey, it was outstanding!

Michael T

Very impressed with the workmanship and attention to detail. The project was completed on time and exceeded my expectations!

Sophia Reynolds, Property Manager

More services: Plastering repairs · Plastering and coving · Plastering extensions and lofts.

Hours and contact

You can reach us during our hours, Monday to Friday 7am to 5pm and Saturday 7am to 1pm, closed Sunday. For a free quote, WhatsApp me on 07453 614095 or message the page. Photos and a short description of the job help us reply quickly.

Elsewhere nearby

We also cover plastering in Warwick, Leamington Spa, Kenilworth and Alcester, plus rendering in Stratford-upon-Avon. Our full range is listed on the plastering and rendering services page.

Plastering in Wellesbourne: common questions

Do you cover Wellesbourne and the surrounding area?

Yes. RCR Connections Ltd is Birmingham based, covering the whole of the Midlands, and works across Wellesbourne and Coventry and Warwickshire. We also cover Coventry, Stratford-upon-Avon and Solihull. For the full list, see areas we cover.

How do I get a plastering quote in Wellesbourne?

WhatsApp photos of the walls or ceilings to 07453 614095, with rough room sizes and what you would like done. We will come back with a free, no-obligation quote, or arrange a visit if the job needs a closer look.

Which parts of Wellesbourne and the area around it do you cover?

All of Wellesbourne and the villages and areas around it. That includes Charlecote, Loxley, Walton, Moreton Morrell and Hampton Lucy.

Can you replaster a room after a rewire?

Yes. A rewire leaves chases and patches all over the walls. We fill the chases, and if the old plaster has come away we take it back and replaster the whole wall or room, ready for decorating.

Do you plaster older and listed houses in Wellesbourne?

Yes. Many of the older houses in and around Wellesbourne still have lime plaster and lath and plaster ceilings. We check what’s there first, then repair, replaster or over-board, using a breathable lime plaster where the wall needs it. If the house is listed, check with the council’s conservation officer before work starts.

How soon can I decorate after plastering?

A skim usually needs a few days to dry, and thicker backing coats need longer, depending on ventilation and the time of year. Wait until the plaster is an even pale colour all over, then start with a mist coat (watered-down emulsion).

Can you plaster over Artex?

Yes. We can skim over Artex, or over-board and skim ceilings that are cracked or uneven. If the Artex went up before 2000, have it tested for asbestos before anyone scrapes or sands it.

What hours do you work?

Monday to Friday 7am to 5pm and Saturday 7am to 1pm.